wireworld
Member Since: 19 Oct 2013
Location: Shropshire
Posts: 145
  
|
It will be interesting to see how you get in with this as I have had the 963 recall carried out and whilst it seems to have stabilised the hot/cold change I still need to set the temp to 25 to get the car warm. All my other LR vehicles and others have only needed 21/22 so something still isn't right!
|
 10th Jan 2017 7:32 pm |
|
|
AndrewS
Tarquin of the Desert
Member Since: 06 May 2005
Location: Y...... because I can
Posts: 10438
|
Had a similar issue, dealer replaced the FBH all sorted so now nice and hot. Drove home tonight just wearing speedos  In the Beginning there was nothing, which exploded.
|
| 10th Jan 2017 7:38 pm |
|
|
DN
D3 Decade
Member Since: 24 Jun 2006
Location: W.London.
Posts: 2294
  
|
 you can spare us the pics for that one AndrewS  D3 owned from new, P017 brake recall, BAS FBHIC, new FBH, LR013487 oil pump, new water pump. RRS front lower suspension arms. New suspension compressor/ relay. New Denso alternator. CuNifer rear brake pipes. New GKN rear propshaft. New HPFP belt & tensioner. New A/C Condenser.NO WARRANTY for many many years.
|
| 10th Jan 2017 7:43 pm |
|
|
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1521
|
Hi Andrew. That's the first I have heard of the FBH being replaced. Were there any indications of an FBH issue , i.e. inability to use it to pre-heat the car ?
It seems to me that there are a variety of things that need to be adjusted/swapped out (FBH, sensors, heating reset etc etc) to get this fixed and the insertion of the piece of foam actually does little to resolve
Sounds like it needs to be taken to a good, keen dealers to get it sorted, and yes...... please spare us the pics of your journey home ! Gary
-------------------------------------------
Discovery 4 HSE 2016MY
|
| 10th Jan 2017 7:49 pm |
|
|
AndrewS
Tarquin of the Desert
Member Since: 06 May 2005
Location: Y...... because I can
Posts: 10438
|
HVAC Update and all other updates were carried out = No Joy. Sensors were changed = No Joy. FBH replaced = Deep Joy
PS I forgot to take pics  In the Beginning there was nothing, which exploded.
|
| 10th Jan 2017 7:55 pm |
|
|
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1521
|
Did you get any indications the FBH was faulty? Gary
-------------------------------------------
Discovery 4 HSE 2016MY
|
| 10th Jan 2017 8:06 pm |
|
|
ianm27
Member Since: 02 Jun 2016
Location: Hertfordshire
Posts: 2154
 
|
AndrewS wrote:
PS I forgot to take pics
Thank heavens for that Uncle Ray's spare wheel protector
Limo Tint
Blackvue front & rear dashcam
Cruise control switch pack
Bodsy's remote for FBH
|
| 11th Jan 2017 12:14 am |
|
|
AndrewS
Tarquin of the Desert
Member Since: 06 May 2005
Location: Y...... because I can
Posts: 10438
|
Gary_P wrote:Did you get any indications the FBH was faulty?
No warnings on the dash. Basically the car was cold when it should have been warm/hot.
When I asked the car to pre heat using the factory remote you could hear a fan start in the scuttle area and run for about 20 seconds then nothing.
Most mornings I call by my workshop thats about a mile away from my house to check things are OK. I turn the engine off have a look about come back to the car an continue my journey. When its cold and I turn the engine off the FBH continues to run and is still running when I get back to the car.
The temp gauge would not lift above 1/3 on a 10 mile drive, when in slow traffic the temp would drop.
So all of the above indicated that the FBH was not working. In the Beginning there was nothing, which exploded.
|
| 11th Jan 2017 9:47 am |
|
|
MGDisco
Member Since: 03 Dec 2005
Location: Stenhosuemuir, Central Scotland
Posts: 41
 
|
Our car was in on Monday and the foam insert was incorrectly located and the repair as per LTB00963 carried out.
As the car is used by my wife, it will be the weekend before I get a chance to go on a long enough (>15 minute run) to see if the warm to cool to cold air blow has been resolved.
Dealer had no issues in undertaking the repair (Morrisons in Stirling) - as usual, they do a good job and are prepared to listen to the customer concerns and act on them. After seeing Andrew's post, the FBH is working on ours - the temp gauge does get up to halfway quickly enough and doesn't seem to drop down at all. No other faults were identified when it was handed back to my wife on Monday. I'll give an update once I have had the run in it.
I hope everyone else can get a resolution to the problem in their vehicles.
|
| 11th Jan 2017 10:05 am |
|
|
Gary_P
Member Since: 03 May 2016
Location: Kent
Posts: 1521
|
Thanks for the updates.
I didn't realise the FBH worked in that way. All I remember from my earliest cars was that if the temp stayed cooler it was indication the thermostat on the coolant system was stuck open. Gary
-------------------------------------------
Discovery 4 HSE 2016MY
|
| 11th Jan 2017 10:34 am |
|
|
MGDisco
Member Since: 03 Dec 2005
Location: Stenhosuemuir, Central Scotland
Posts: 41
|
So, took the car for a run yesterday - and the initial feeling was good, that after 15 minutes the temp seemed to be fine, controlled better than before.
BUT, another 10 minutes or so - cool air once again blowing from top vents with cool air around legs shortly after.
So, the problem is still present but only after a greater time has elapsed.
To me, this points to a calibration issue of the HVAC system (whether its sensors or the controller software). I'll need to report back to the dealer and see what the next step is from them.
Keep you updated as to what happens.
|
| 16th Jan 2017 9:35 am |
|
|
Getoffmyland
Member Since: 13 Aug 2015
Location: West Berkshire
Posts: 105
|
Pls do keep us updated if your dealer finds the fault MGDisco.
My vehicle has exactly the same issue as the one you state. have to set to 26/26/high to get any warm air, then after fifteen minutes it gets cold again.
|
| 16th Jan 2017 11:53 pm |
|
|
Barber
Member Since: 21 Sep 2016
Location: Bolton
Posts: 22
|
ok... Mine's been in the dealers today..
Called me this afternoon to say they've found nothing wrong with it, but they have a bulletin saying that anyone with this complaint then they have to replace a seal (never asked too much as i was working )
they're going to re book it in and fit the seal....
Watch this space. (but don't hold your breath)
|
| 17th Jan 2017 10:10 pm |
|
|
wireworld
Member Since: 19 Oct 2013
Location: Shropshire
Posts: 145
|
Maybe that's the LTB000963 foam replacement. Don't hold your breath if it is as it hasn't worked in mine
Last edited by wireworld on 18th Jan 2017 9:22 am. Edited 1 time in total
|
| 18th Jan 2017 9:21 am |
|
|
swansty
Member Since: 21 Sep 2008
Location: Northern Ireland
Posts: 918
 
|
As a temporary fix, switch the AC off. Been running around like this for a week and the car doesn't get cold after reaching the target temperature. Not ideal especially when its raining but at least I don't have cold feet!
|
| 18th Jan 2017 9:22 am |
|
|
