Which reminds me.......I still haven't got around to fitting them to my new bumper!
25th Aug 2016 11:36 pm
CL84
Member Since: 30 Jun 2012
Location: Sussex
Posts: 9
I have now bought these fog lights, hopefully fit them this weekend. I have been trying to find, without success, the fog light setting, does anyone know the percentage they need to be set to, and the easiest way to set them up. ThanksMY11 D4 HSE Santorini Black
MY05 D3 S Bonatti Grey - Gone
15th Sep 2016 10:47 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15235
I thought it would be the responsibility (and even legislation) for the manufacturer i.e. Osram to provide set up detail (as well as a fitting guide).
If not on or in the box, I'd get onto the supplier and ask them to pursue.
16th Sep 2016 8:46 am
CL84
Member Since: 30 Jun 2012
Location: Sussex
Posts: 9
It gives the instructions on adjusting them in the fitting guide. I it doesn't have the specific setting for the car in the instructions as these fog light fit multiple vehicles in different countries so there are many different settings, instructions would end up being like an encyclopedia! What I'm after is the disco 4 fog light setting percentage, I may be being stupid, but I can't seem to find it anywhere.MY11 D4 HSE Santorini Black
MY05 D3 S Bonatti Grey - Gone
16th Sep 2016 10:41 am
PDC
Member Since: 20 Jul 2016
Location: Warwickshire
Posts: 174
I hope you find out the answer because if you do and you fit them successfully I will do the same as you.
I hope you don't mind been used as a guinea pig........ 2010 RR 5.0 Autobiography
2020 F-Pace SVR
2018 RRSport
2015 Disco XXV
2011 Disco 3.0
2008 RRS HST V8
20th Sep 2016 3:35 pm
Mr.Tom
Member Since: 01 Jun 2014
Location: St Neots
Posts: 1641
I think they are plug and play, you don't need to set anything. A few on here have fitted these or similar from Osram and I don't recall any settings like that being neededSill protection - LED internal lights - LED reverse lights - boot liner - Dog Guard - Rock sliders
MY12 D4 HSE - been and gome
MY16 D4 Landmark
20th Sep 2016 4:15 pm
CL84
Member Since: 30 Jun 2012
Location: Sussex
Posts: 9
Got these fitted at the weekend, much whiter light than the standard fogs. The way I got round setting the height of the light beam was using some chalk and a garage door. I parked about a metre from the door, and marked the position of the tyre on the floor, I then turned on the fogs and marked the position of the light beam on the garage door with the chalk. I then changed the fogs, a nice straightforward job. I then parked back on my marks, put on the fogs to see the position, just needed a bit of adjustment on the adjuster screw on the back of the new fog, on annoying thing is you have to take the fog out to adjust it, but not exactly difficult to do. Took me about 45 mins to do.
I will add a few pics soon.MY11 D4 HSE Santorini Black
MY05 D3 S Bonatti Grey - Gone
20th Sep 2016 7:12 pm
CL84
Member Since: 30 Jun 2012
Location: Sussex
Posts: 9
Click image to enlarge
These are the old ones, can't see it very well in the pictures but the lenses were quite fogged up.
Click image to enlarge
These are the new ones, absolutely crystal clear.
Click image to enlarge
Old fog lights, very yellow.
Click image to enlarge
New fog lights, much whiter, nice and bright, not a very good pic as was taken in bright daylightMY11 D4 HSE Santorini Black
MY05 D3 S Bonatti Grey - Gone
20th Sep 2016 7:33 pm
PDC
Member Since: 20 Jul 2016
Location: Warwickshire
Posts: 174
Nice one, they look really good. I will put that on my list of things to do...... 2010 RR 5.0 Autobiography
2020 F-Pace SVR
2018 RRSport
2015 Disco XXV
2011 Disco 3.0
2008 RRS HST V8
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum