luciogodoy
Member Since: 14 Apr 2008
Location: Windsor - UK
Posts: 356
  
|
| Powertrain control module error 904 block 37 and block 44 |
|
Hi All;
I'm using the JLR 134 (136v) and have been trying to download the car's config (CCF) and i keep getting the following error:
Powertrain control module error 904 block 37
Powertrain control module error 904 block 44
Any clues what this is pls?
Many thanks
Lucio I'm riding a R1250GSA Triple Back
Previous love: Disco 3 HSE MY07, D4 heated Steering/W, D4 rear cluster, D4 extended roof rack, D4 grille & air grille, D4 rear bumper, colour coded arches + front bumper, side-steps, Webasto timer/ remote control, De-Tangoed Xenon headlights + HID, LEDs all around, reverse CAM (RR hack) + brightness, DLR LEDs, 3-click indicator, SatNav on the move, EGR's done, front/rear antiroll bar Polybush, gearbox pan/filter + oil mega-flush.
|
 27th Nov 2015 7:17 pm |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8154
  
|
No! Should have bought an Iid tool  It can when others can't,
It will when others won't,
It goes where others don't.
|
| 27th Nov 2015 8:37 pm |
|
|
SteveNorman
Member Since: 14 Oct 2005
Location: Somerset
Posts: 1145
|
Yes a problem with the SDD software.
Older versions (which I assume you are using a cracked version, as the latest up to date version is 144) have an issue with reading/writing to the pcm and sends back an echo error, and reports the block fail.
This was fixed on subsequent versions.
The only thing you can do is keep trying, and hopefully you will be lucky enough to get the error just after the ccf is written, then it should be ok. Or try a much older or newer version of IDS or SDD which didn't have the problem.
Pat at Gap wrote especially the iid software to allow me to rewrite the ccf in the pcM, which sorted one I had here, (thanks again Pat). As it took Landrover quite a few months to come up with the bug fix.
Regards
Steve
|
| 28th Nov 2015 7:03 am |
|
|
