|
|
|
|
radders89
Member Since: 30 Aug 2010
Location: West Sussex
Posts: 1051
  
|
Yep cheers for that Madrilleno, I should have read all of your post.
I've had a good look at the pics and on the whole they do look pretty good. A few observations; the welds don't look great and a few of the holes appear visible behind the washers. Are the holes too big would you say? MY15 D4 SDV6 HSE Corris Grey - Gone
MY05 D3 TDV6 SE Zambezi silver Auto Alpaca leather - Gone
MY02' Seat Leon 1.6s Metallic Black cloth trim with a hint of mould
Club Sandwich
Women... Can't live with em, can't kill em...
|
 5th Apr 2016 12:13 pm |
|
|
Madrilleno
Member Since: 13 Oct 2014
Location: Nottingham
Posts: 1782
|
The welds are OK, but they haven't been fettled afterwards. I know the manufacturer is a well established fabricator/welder, but there is only so much you can do and still make a profit at £200.
He has made parts for other LR models and I'm led to believe that these are well received.
No, I don't think the holes are too large, they are the same size as the Prospeed ones. There has to be some wiggle room to allow for variations in manufacture of the vehicles themselves. There are two rules for success,
1. Never tell everything you know.
D4 gone!
D5
|
| 5th Apr 2016 12:23 pm |
|
|
radders89
Member Since: 30 Aug 2010
Location: West Sussex
Posts: 1051
|
Thanks for that. Stainless screws and washers at all?  MY15 D4 SDV6 HSE Corris Grey - Gone
MY05 D3 TDV6 SE Zambezi silver Auto Alpaca leather - Gone
MY02' Seat Leon 1.6s Metallic Black cloth trim with a hint of mould
Club Sandwich
Women... Can't live with em, can't kill em...
|
| 5th Apr 2016 12:35 pm |
|
|
Madrilleno
Member Since: 13 Oct 2014
Location: Nottingham
Posts: 1782
|
Yes. There are two rules for success,
1. Never tell everything you know.
D4 gone!
D5
|
| 5th Apr 2016 12:39 pm |
|
|
MarkOne
Member Since: 23 Jul 2011
Location: County Antrim
Posts: 3345
|
They look good for the money, can't see anyone getting anything made any better as cheap I'll be taking a set.
|
| 5th Apr 2016 1:23 pm |
|
|
Kynance8
Member Since: 19 Sep 2014
Location: Derby
Posts: 5
 
|
Hi very interested in a set of these...
Any left
|
| 8th Apr 2016 2:32 pm |
|
|
Joes
Member Since: 05 Sep 2015
Location: Limburg
Posts: 16
 
|
Any idea on shipping cost to Belgium?
|
| 11th Apr 2016 1:16 pm |
|
|
Madrilleno
Member Since: 13 Oct 2014
Location: Nottingham
Posts: 1782
|
I can weigh and measure next week, but they are over 2m long and must be around 75kg. There are two rules for success,
1. Never tell everything you know.
D4 gone!
D5
|
| 11th Apr 2016 5:24 pm |
|
|
turborange
Member Since: 12 Mar 2014
Location: Sheffield
Posts: 56
|
Is it still possible to get on this group buy? current
D3 SE 2.7 tdv6
D2 TD5 Td5 inside tuned
RRC 200tdi front and rear locking diffs on 35's
|
| 21st Apr 2016 4:38 am |
|
|
Madrilleno
Member Since: 13 Oct 2014
Location: Nottingham
Posts: 1782
|
This thread was an expression of interest rather than a group buy.
The last time I spoke to Carl, he said he would do a special price if we had 10 or more sets. The price would then be £200 a set delivered to most of the U.K., or £180 collected from Shirebrook in Notts. Since he isn't a site sponsor, I'm not sure how we would do a group buy. I'm sure Martin would want a site donation which would increase the price slightly, but at anywhere round £200 they're well worth the money, IMHO. There are two rules for success,
1. Never tell everything you know.
D4 gone!
D5
|
| 21st Apr 2016 6:00 am |
|
|
Simon 5450
Member Since: 31 Aug 2015
Location: Öregrund
Posts: 9
 
|
Do you now the freight cost to Sweden?
Any idea when this "gruop buy" will be arranged?
//Simon TDV6 HSE -07
|
| 17th May 2016 8:54 am |
|
|
Madrilleno
Member Since: 13 Oct 2014
Location: Nottingham
Posts: 1782
|
Group buy here - http://disco3.co.uk/forum/topic144829.html we need to sell 10 to get the price. PM your address and I will get a shipping price for you. There are two rules for success,
1. Never tell everything you know.
D4 gone!
D5
|
| 17th May 2016 10:38 am |
|
|
peteyd
Member Since: 08 Mar 2016
Location: South Bucks
Posts: 551
|
How easy are these sliders to fit?
And do they also work as side steps?
Thanks
PD MY16 D4 Graphite in Loire Blue
|
| 18th May 2016 7:21 am |
|
|
Madrilleno
Member Since: 13 Oct 2014
Location: Nottingham
Posts: 1782
|
They are easy to fit. You remove the trim running along the sill. The trim is held on with press fasteners and a couple of self tapping screws. The clips usually break, but they are not needed when the sliders are on. If you ever want to replace the trim, you can buy the clips cheaply from AF.
Then after cleaning the area, bolt them on. I would suggest applying a thin (1mm) self adhesive foam rubber strip to the back of the sliders at the top and bottom before bolting them on to help keep dirt out. Also apply copper grease to the bolts to facilitate easy removal later. I also sprayed the area where the sliders fit with Dinitrol anti-corrosion.
Should take about 30 minutes for the first one, 20 for the second when you know what you're doing.
Group buy is here: http://disco3.co.uk/forum/topic144829.html There are two rules for success,
1. Never tell everything you know.
D4 gone!
D5
|
| 18th May 2016 7:30 am |
|
|
