But in my Updater tool (v4.2) there is no option to select another firmware?--
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged
no, when my wife tries to enter a destination while I'm driving, the car says no --
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged
whadayaknow, I tried your suggestion: CCF > ACM > Nav on Move ... Enable
And the option was there, so I enabled it.
Car is still on the charger now, so will report back tomorrow if it did indeed work.
bit of a PITA to have to rescan all the radio stations and set the date/time after every CCF flash though
we really need to update the Wiki to reflect these changes, but every time I try to login there is a DB failure...--
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged
Well, I enabled the Nav on Move, but on our way to town this evening I asked SWAMBO to try entering a destination and it wouldn't let her
So it seems even when enabled the system doesn't work... --
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged
Member Since: 02 Dec 2011
Location: Montreal
Posts: 745
On a D4, the Nav unit firmware needs to be changed and this cannot be done via the OBD port.http://www.gap-diagnostic.com/
9th Nov 2015 6:41 pm
Scottydog
Member Since: 03 Aug 2015
Location: Scotland
Posts: 377
Alarm chirp half working
Well plucked up the courage and plugged in the IID and had a look around, I enabled the alarm double chirp - it works/sounds great when unlocking but i can just hear something (not sure what the something is) when locking? is that the way its meant to be?24MY X-Dynamic HSE Defender 110.
Discovery 4 Marina Black HSE LUX - gone
Northern Lights Violet A45 - my car
E36 Daytona Violet M3 stays under wraps - my toy.
On a D4, the Nav unit firmware needs to be changed and this cannot be done via the OBD port.
Ah, thanks Pat.
So how do I go about updating the Nav firmware?--
2010 Defender Puma 90 + BAS remap + Alive IC + Slickshift + Ashcroft ATB rear
2015 Range Rover Sport V8 Supercharged
Member Since: 02 Dec 2011
Location: Montreal
Posts: 745
Quote:
So how do I go about updating the Nav firmware?
At the current time, only the dealership will be able to do it unless someone here has a Nav update tool and SDD.http://www.gap-diagnostic.com/
11th Nov 2015 5:58 pm
PatGAPInnov Site Sponsor
Member Since: 02 Dec 2011
Location: Montreal
Posts: 745
As the corrected... Updating with the nav update tool wont enable nav on move. We will investigate this one in the near future.http://www.gap-diagnostic.com/
12th Nov 2015 1:54 am
Nubber99
Member Since: 13 Apr 2014
Location: Poole
Posts: 289
I have a 2010 D4 nav in my D3 and I can enter navigation data on the move, as long as I accept the disclaimer when I first go on to the nav page.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
