Member Since: 23 Apr 2015
Location: Oxfordshire/Wiltshire
Posts: 147
Many thanks chaps looks simple enough! farmer I am fitting a second hand one 😉
30th Jun 2015 9:04 pm
Farmer Chalk
Member Since: 07 Mar 2013
Location: Independent Republic of Kentishshire.
Posts: 4184
Those instructions are as clear as mud...... The RAI effectively fits by using the metal gasket bolted to the lower part of the 'snorkel'... If this is a second hand one then that gasket will still be fitted. The pegs on this clip over the lower part of the air intake on the wing. The unit is held in place by two long bolts which bolt through the snorkel and screw into the rivnuts.....
You will need to drill two holes in the wing above the air intake. And then have two rivnut captive nuts fitted.... You need a special tool to fit these.... I actually have one if you want to borrow it and a couple of rivnut rivets....you will also need to fit one of these at the top of the windscreen pillar..
If you pm me if you're struggling and I'll guide you through it step by step... Good luck!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum