Last edited by Robbie on 8th Feb 2015 10:11 pm. Edited 1 time in total
8th Feb 2015 9:04 pm
Tufty
Member Since: 13 Jul 2010
Location: UK
Posts: 481
Purchased.......
8th Feb 2015 10:02 pm
Sloss
Member Since: 18 Aug 2013
Location: Aberdeenish
Posts: 1691
Well guys, I still have no joy with the WTT software.
The laptop says 'ready' bottom left but it scrolls through all the available burners and eventually tells me COM 3 cannot connect.
Any pointers?Stew,
2010 D4 gone but I really loved it
Went back to Merc - C350 AMG
9th Feb 2015 6:07 pm
jobster
Member Since: 08 Jul 2012
Location: Hilversum
Posts: 591
Quote:
Well guys, I still have no joy with the WTT software.
The laptop says 'ready' bottom left but it scrolls through all the available burners and eventually tells me COM 3 cannot connect.
Any pointers?
I suggest you uninstall the webasto software, restart, install from the latest Webasto software ( pm me your email and I will send the file thru wetransfer.com, this one has all relevant drivers), after install, hook up only (!) the KKL USB cable, let windows look for and install the drivers, and once finished, hook it up to the FBH. And make sure you have the probes in well.RLD Sump Guard
GVIF & rear camera
New FBH via Dan
BAS Remap with IIDTool
9th Feb 2015 7:01 pm
Sloss
Member Since: 18 Aug 2013
Location: Aberdeenish
Posts: 1691
Jobster,
Got the Email. I'll download it at work tomoz as it would take hours here in the sticks!
Thanks for that.
Oops, edited to sort Mobster to Jobster, predictive texting, Argh!Stew,
2010 D4 gone but I really loved it
Went back to Merc - C350 AMG
9th Feb 2015 7:43 pm
Sloss
Member Since: 18 Aug 2013
Location: Aberdeenish
Posts: 1691
Didn't work last night but back inside I got the Computer to recognise the USB KKL lead so maybe this evening it will work.
Minus 5 coming off the hill this morning so it might have been nice to have it working
The latest version of the WTT Software Job provided says it's compatible with USB - just run Version 3.
I'll try again tonight Stew,
2010 D4 gone but I really loved it
Went back to Merc - C350 AMG
11th Feb 2015 7:09 am
eenomc
Member Since: 07 Oct 2013
Location: Moray
Posts: 173
I can get mine to connect 100% of the time:
1. unplugthe webasto plug with the can bus, wbus etc. Make connection to wbus on that plug (not the heater)
2. Start web as to diagnostics
3. Plug back into heater
11th Feb 2015 7:22 am
pandj
Member Since: 15 Jan 2015
Location: Herts
Posts: 20
in the directions of this forum, Robbie, discostic et al who have contributed vast amounts of FBH input, as a result of which, my FBH is now working as it should! Downloaded Webasto software, purchased connective bits and bobs, plugged in, added brake cleaner with gay abandon, smoked out Herts and part of Beds, and ended with full burn, no smoke, 85'C coolant temp, and a broad grin!
It did take several failed burns and partials, but got there in the end. Now off to Maplin to buy fob and receiver to add to Webasto timer and wire it all in!
Thanks to all sources of info and inspiration on this one, guys. If anyone local (AL3) is in the same boat as I was and wants to take advantage of my set-up, feel free to pm me. I also have full w/shop facilities inc 3.5t ramp, and a recently retired LandRover Mechanic who does a bit of casual work in there!
Regards,
Pete
11th Feb 2015 12:00 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Marvellous!
Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 18 Aug 2013
Location: Aberdeenish
Posts: 1691
I'm still not getting connected. Device Manager says there is a Code 31 problem.
The WTT Software reports that it can't find a USB connection.
Any suggestions folks?Stew,
2010 D4 gone but I really loved it
Went back to Merc - C350 AMG
11th Feb 2015 8:15 pm
Sydney
Member Since: 11 Aug 2013
Location: St Neots
Posts: 903
Code 31 points to a driver error, more than likely the USB. You may have to track down a specific driver for your USB device which can be a bit of a pain.De-Tango
V8 Brakes
EGRs blanked
Running boards
3 flash indicators and clock on dash
Blingy grille...
11th Feb 2015 9:13 pm
Sloss
Member Since: 18 Aug 2013
Location: Aberdeenish
Posts: 1691
Sydney,
The KKL unit came with a mini disc with Drivers. They seemed to load OK but Device Manager still says Code 31 and on other attempts the install reports 'this may not have installed properly'.
I just wish it would all work on my Mac - that usually just does it without any problems.
Winter will be over soon.... Stew,
2010 D4 gone but I really loved it
Went back to Merc - C350 AMG
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
