Out of interest where are you getting your work done? I've recently found a 4x4 garage in Wellington, I'm yet to use them but they're in the small industrial estate in Wellington Marsh, called 'Wellington 4x4'. Loads of Defenders there and I think I'll give them a go next time I'm too lazy to do something myself. Ted
D3 HSE | 19" GG AT3 | Mantec Sump Guard | Front Runner Rack | LR ladder | F+R Light Guards | EGR blanked | Decat | RS500 Intercooler | Tuff Trek TT-H1 awning | T Maxx Split Charge | IID Tool | Prospeed rock & tree sliders | V8 Front brakes
18th Dec 2015 9:58 am
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
I did it myself, my father in law owns a garage so I have use of it whenever I want. I don't get him to do the work for a few reasons, the main one being he refuses to let me pay him anything which makes me uncomfortable! I do enjoy working on my D3 also, as long as I know what I'm doing!
I've been to Wellington 4x4 quite a few times as he's just down the road from me but never with the D3. I always found him a bit arrogant but just recently when buying bits for my dads 90 he's been super helpful and talkative, so my opinions changed! A bloke up the road has a D3 for work and his company always uses him, in fact they swear by him!
Got a rear prop waiting to go on here too. Hoping I might get time to do it this afternoon. Current: Discovery 3 06MY (55 reg) HSE Auto Zambezi Silver Allisport Fast Road Intercooler, V8 Brakes, Silicone IC Hoses, EGRs Blanked, Remapped, De-Cat pipe, FBHIC
Freelander 2 2007 HSE Manual Tambora Flame
Previous: FL2 56 reg SE Manual Black (written off )
Disco 3 06 reg B7S Manual Rimini Red
Disco 2 TD5 Y reg ES Manual Blue - Chipped
Several Discovery 300 TDis
19th Dec 2015 10:28 am
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
No, 'fraid not, but I'm going to do it in a moment. Current: Discovery 3 06MY (55 reg) HSE Auto Zambezi Silver Allisport Fast Road Intercooler, V8 Brakes, Silicone IC Hoses, EGRs Blanked, Remapped, De-Cat pipe, FBHIC
Freelander 2 2007 HSE Manual Tambora Flame
Previous: FL2 56 reg SE Manual Black (written off )
Disco 3 06 reg B7S Manual Rimini Red
Disco 2 TD5 Y reg ES Manual Blue - Chipped
Several Discovery 300 TDis
Now done, but not without an eventful morning... Just about to start and the MiL phones up; she's got a puncture on her mobility scooter, having tried to take it half way into the woods.
Had to crack out the impact wrench on the rear bolts, one of the new front bolts was faulty and wouldn't fit on the socket, and (as expected) exhaust heat shield needed washers.
UJ was knackered as well as the centre bearing, so glad to get it done. Current: Discovery 3 06MY (55 reg) HSE Auto Zambezi Silver Allisport Fast Road Intercooler, V8 Brakes, Silicone IC Hoses, EGRs Blanked, Remapped, De-Cat pipe, FBHIC
Freelander 2 2007 HSE Manual Tambora Flame
Previous: FL2 56 reg SE Manual Black (written off )
Disco 3 06 reg B7S Manual Rimini Red
Disco 2 TD5 Y reg ES Manual Blue - Chipped
Several Discovery 300 TDis
20th Dec 2015 1:06 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
It's like christmas has come late for Vinnie! Ordered a few bits I've been wanting to do for a while now, and hopefully the new rear discs will get rid of the constant rubbing noise which has been doing my head in!
Click image to enlarge
Considering the awful weather I thought I'd waste no time in fitting the new wiper arm/blades!
Click image to enlarge
Click image to enlarge
Last edited by Iceman08 on 12th Sep 2017 8:36 pm. Edited 1 time in total
9th Jan 2016 3:34 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
Last week I got around to fitting the new Osram Xenarc Nightbreaker bulbs to Vinnie. They are a marked improvement over my last bulbs but a little more yellow than I would of hoped for, my sidelight bulbs and fog/drl's are more white/blue compared to the new bulbs. If I was to buy them again I would probably buy the cool blue bulbs for a better match!
Click image to enlarge
Last edited by Iceman08 on 12th Sep 2017 8:37 pm. Edited 1 time in total
21st Jan 2016 8:11 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
Yesterday afternoon I decided to get around to replacing both diff oils with some nice new Castrol Syntrax Longlife 75W-90.
I started with the rear diff and slackened the filler bolt first
Click image to enlarge
And then the drain bolt
Click image to enlarge
The oil was a horrible brown colour
Click image to enlarge
I cleaned the drain plug and tightened it back up to the correct torque. Then I pumped 1.1L of the new oil in and refitted filler plug to correct torque
Click image to enlarge
Then moved on to the front, slackening off the filler plug first again
Click image to enlarge
Followed by the drain plug
Click image to enlarge
More muddy brown oil just like the rear
Click image to enlarge
And the drain plug didn't look so good this time
Click image to enlarge
I cleaned the drain plug off and noticed this one will come apart........not sure if thats supposed to happen or not?!
Click image to enlarge
Then I replaced the drain plug and tightened to the correct torque before adding 0.61L of fresh oil. Refitted filler plug to correct torque and was job done!
Last edited by Iceman08 on 12th Sep 2017 8:47 pm. Edited 2 times in total
25th Jan 2016 8:39 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
Leading on from the diffs I decided to get on with doing the rest of the service! Pictures aren't great as I was just trying to crack on so I only took a few here and there! I started with the fuel filter, old out
Click image to enlarge
New in
Click image to enlarge
Then the oil filter, I wanted to get on top to see exactly where the spigot should line up with, didn't fancy ruining my engine by getting it wrong!
Click image to enlarge
Pollen filter
Click image to enlarge
And just the remains of the other service bits
Click image to enlarge
Next I moved on to replacing my steering rack, not the most fun things I've ever done but rewarding when it's completed! I lubricated all the bolts a week in advance so it came apart a piece of cake! Again not many pics but you get the idea!
Old out
Click image to enlarge
Click image to enlarge
And new in
Click image to enlarge
Click image to enlarge
New bolt fitted to lower steering UJ
Click image to enlarge
Before I had chance to get the four wheel alignment done it was time for it's MOT, which it failed on the NSF wheel bearing. As I've been really busy with work and had no free time to fit one myself I ordered a new Timken bearing from AV and had it delivered directly to the garage where it had it's MOT. They fitted it and gave him a pass certificate!
I then booked it in at Land Rover to have the four wheel alignment done and the tow bar recall while they were at it. They informed me the courtesy vehicle would be a Discovery Sport which I didn't want so I roped my dad into taking Vinnie in for me and having the Discovery Sport for the day. He then turned up where I was working in this........
Click image to enlarge
I was gutted, and he was vey chuffed with himself knowing how much I wanted to drive a new D4!! Half way through the day I received a link via text message from Listers Land Rover, it was a video for me of my visual health check 8) The only thing they commented on was a lip on both front brake discs, which gives me the perfect excuse to eventually fit the V8 brakes! After collecting Vinnie he now handles so much better with the new bits fitted and the wheel alignment done.
Which left me one last thing to do.......fit these bad boys
Click image to enlarge
Simple improvement but makes the world of difference!
Last edited by Iceman08 on 12th Sep 2017 9:18 pm. Edited 3 times in total
28th Feb 2016 11:28 am
tayaste
Member Since: 15 May 2013
Location: Chester
Posts: 7633
Great work
28th Feb 2016 12:25 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
New rubber rocked up today, just awaiting the rims now!
Click image to enlarge
Last edited by Iceman08 on 12th Sep 2017 9:18 pm. Edited 1 time in total
31st Mar 2016 7:00 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72947
Discerning tyres!! And get that polythene off, find an enclosed space where you and the tyres will fit and enjoy the aroma.
31st Mar 2016 7:05 pm
Iceman08
Member Since: 22 Sep 2014
Location: Hereford
Posts: 2284
I saw they were in stock so I jumped on them! That was always my worry with getting 19" rims, that there would be no stock of them! No better smell of fresh rubber..........or the feel of it over my naked body........I'm off to the shed for a while now!!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum