Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
santiD3
Member Since: 09 Jan 2011
Location: Navarra
Posts: 261
|
Hi
Last week I ave a problem with my rear parking sensor. it beeps all the time without any obstacle once I put the reverse gear.
I am reading the faults using MSV2 and give me the code U0159, does anybody know what it means?
BR
|
10th Feb 2017 8:23 pm |
|
|
sparsons
Member Since: 21 Apr 2017
Location: Totnes,Devon
Posts: 14
|
cheesedoff wrote:Henry08Disco wrote:Hi My 08 has jest developed a problem, on switching on ignition, get longer than normal beep at rear of sensors, dash switch flashess contently, Select reverse get the same problem but I have no nose for any of the sensors? Anyone able to help?
Did you ever find out what the issue was? Our 08 is doing the exact same thing!
Mine is doing the exact same!
Was working fine now long beep. no warnings on the dash at all..
Most annoying!!
|
19th May 2017 1:21 pm |
|
|
webgatorz
Member Since: 02 Jun 2018
Location: Leic
Posts: 1
|
Sensors work in Park, but when you put it into drive or reve |
|
Hi, I have a 2005 Disco 3 HSE front and rear sensors
Two sensor on rear bumper where dead no clicking when I put my ear to them, so replaced them and both front bumper and rear bumper sensors work perfect when you walk up to them while the car is in PARK
But as soon as I put it into reverse, or drive, the parking sensors start doing strange beeping and the light on the button flashes also, when there is nothing near them and keep doing this when we drive off, so we switch them off at the switch.
Any help would be greatly appreciated
|
2nd Jun 2018 6:28 pm |
|
|
OldBoater
Member Since: 27 Feb 2018
Location: Newark, Nottinghamshire
Posts: 16
|
Hi, I have been getting the solid tone from the front parking sensors. I took the bumper off and found a damaged wire. Spliced in a new wire and all was well....or so I thought. A couple of days later, the issue returned.
Having had a fault with the sunroof where the fix was to hold the sunroof switch in for 30 seconds, I thought I'd give that a go with the PDC.
I turned off the PDC (PDC switch light off) then held the switch in for 30 seconds or so until the I got a single beep from the rear sensor speaker. Mysteriously, the front sensors now work OK
My question is this - is holding in the PDC for 30 seconds a secret reset command? I RTFM but could find no reference to resetting the PDC ECU.
Coincidence or a secret reset command??? If it stops working again I'll update the forum.
|
18th Jul 2018 2:37 pm |
|
|
breng27
Member Since: 20 Sep 2018
Location: Stockport
Posts: 1
|
Faulty sensors and unplugged cables |
|
I have been a Disco 3 owner for a grand total of 2 days. I have the same issue as many with my sensors. There is a long beep and flashing light on the button. I have tried to clean all sensors and press and hold the button for 30 seconds to reset but to no avail. I have checked behind the rear passenger side lights and there is a connector which is unplugged (see photo). Anyone have any ideas if this is linked to the issue or what the connector does?
Thanks
|
24th Sep 2018 8:36 pm |
|
|
Shane10010
Member Since: 13 Apr 2019
Location: Northampton
Posts: 1
|
Reverse Lights and Reverse Parking Sensors not functioning ( |
|
Hi,
Had the Disco for around 3 months now and finally getting around to looking at this.
I get the transmission position on the dash but no reverse lights and the parking alarm sounds for 5 seconds. Checked codes and tells me no signal from any of the rear sensors.
I have :
- removed and checked the fuses I can find but all seem fine
- removed, cleaned and refitted connectors, including around gear selector
I understand that the manual gearbox has an XYZ unit that sometimes needs adjustment - does the auto have something similar?
Any thoughts?
|
13th Apr 2019 3:52 pm |
|
|
leroymusic00
Member Since: 12 Jan 2021
Location: Carlisle
Posts: 143
|
wilsonmg wrote:Slightly different issue has just appeared.......
when I select reverse, I get a higher than usual 'beep', that is constant for about 5 sec's, then stops then the amber PDC light starts to flash ?????
the front sensors are still fine and work ok... only the rear ones having a hissy fit..... anyone any idea's
I get exactly the same problem - I have tried everything, including WD40 squirted on them...
|
15th Jan 2021 9:25 am |
|
|
leroymusic00
Member Since: 12 Jan 2021
Location: Carlisle
Posts: 143
|
PARKING SENSORS DON'T WORK |
|
Hi - I have tried everything except to fit new sensors themselves. I give up with them...
|
15th Jan 2021 9:27 am |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.