Phil W
Member Since: 26 Jan 2010
Location: Chester
Posts: 20
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 S Manual Belize Green 2005 Discovery 3 TDV6 S Manual Belize Green](../images/veh/belize_green.gif)
|
My 2005 Disco 3 has just developed the same problem this weekend - it only has PDC on the rear. When in reverse the PDC starts a continuous high pitched squeal until turned off. I can only feel the wiring behind the two outer most sensors and they seem OK. Seeing as we've just had a the driest June for many years I can't see water ingress being an issue. I can't reach the inner two to check. How easy is it t oget the rear bumber off without a pit or ramp?
Apart from a wiring loom problem what else could it be and is it something I can do myself without having to go and get my wallet empited by a main dealer who refuses even look at a problem unless I agree to pay an 'investigation fee'.
|
28th Jun 2010 7:08 pm |
|
|
popsdosh
Member Since: 09 Nov 2009
Location: cambs
Posts: 442
![](templates/vbnew/images/spacer.gif)
![2016 Discovery 4 3.0 SDV6 Graphite LE Auto Corris Grey 2016 Discovery 4 3.0 SDV6 Graphite LE Auto Corris Grey](../images/veh/corris_grey.gif)
|
Mine has done this aswell I think you will find its the temperatures as I parked out of the sun and everything was OK again.
|
29th Jun 2010 2:04 pm |
|
|
Phil W
Member Since: 26 Jan 2010
Location: Chester
Posts: 20
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 S Manual Belize Green 2005 Discovery 3 TDV6 S Manual Belize Green](../images/veh/belize_green.gif)
|
popsdosh
You may well be right. All OK this morning. Car parked outside office in baking sunlight all day yesterday. Why would this cause a problem?
|
29th Jun 2010 7:09 pm |
|
|
car-breaker
Member Since: 29 Jun 2010
Location: west yorkshire
Posts: 46
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 HSE Auto Java Black 2006 Discovery 3 TDV6 HSE Auto Java Black](../images/veh/java_black.gif)
|
mzplcg wrote:wilsonmg wrote:Slightly different issue has just appeared.......
when I select reverse, I get a higher than usual 'beep', that is constant for about 5 sec's, then stops then the amber PDC light starts to flash ?????
the front sensors are still fine and work ok... only the rear ones having a hissy fit..... anyone any idea's ![Bow down Bow down](images/smiles/icon_bow.gif)
Can be any number of things apparently. I have this exact issue and am waiting for a new ECU to arrive. Fronts are fine until I use the rears when the fault disables the system. The system resets itself after restarting the engine.
Hi , mines doing exactly this aswell now , any help please , i hate going to the dealers if i can help it , how do you get these out to check wires etc , i dont wanna cause more damage if they are hard to remove etc .
cheers
Paul
|
17th Sep 2010 6:24 pm |
|
|
J57C
Member Since: 16 Sep 2010
Location: Derby
Posts: 1
![](templates/vbnew/images/spacer.gif)
|
Does anyone know how to decide if it's the parking sensors, or the control unit which is U/S? I know the sensors are supposed to tick but is there a more scientific way of testing them? I understand the sensors are about £40 each but how much is the PDC control box?
My PDC system- rear only- can be[a] short beep,[b] continuous beep until first selected [c] no beep of anykind!
12 October 2010
I have just had an auto sparks round with a magic box. He plugged it in and said all sensors are OK it's the control box which is not talking to the system properly. New PDC needed.
A new PDC has to be fitted by a LR Dealer [ it has to be porgrammed in] which is going to be ££££££, so I've opted for an aftermarket kit at about £200. Will keep you posted.
Last edited by J57C on 12th Oct 2010 3:47 pm. Edited 1 time in total
|
20th Sep 2010 4:00 pm |
|
|
Phil W
Member Since: 26 Jan 2010
Location: Chester
Posts: 20
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 S Manual Belize Green 2005 Discovery 3 TDV6 S Manual Belize Green](../images/veh/belize_green.gif)
|
All.
I never cured my problem - it went away by itself. I think its to do with the control unit in the rear nearside door.
I had a problem with the windoew in that door and itturned out to be a chaffed loom where it enters the door. Waggling the loom a couple of times seeemed to cure the parking sensor problem. I toccured again a couple of weeks ago and the same trick sseemed to cure it. My local garage have said they can only investigate if the problem reappears.
|
22nd Sep 2010 7:59 am |
|
|
joakes
Member Since: 16 Oct 2009
Location: UK
Posts: 49
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 S Auto Zambezi Silver 2005 Discovery 3 TDV6 S Auto Zambezi Silver](../images/veh/zambezi_silver.gif)
|
Rear PDC beep continuously |
|
Hi, I am getting this fault where the rear reversing bleepers beep continuously when r, auto, is seleted. I can switch them off by pressing the button on the dash. I am assuming one of the sensors is faulty. Does anyone know how to remove them or how to check which one it is ?
Jonathan joakes
|
6th Oct 2010 10:12 am |
|
|
klacey
Member Since: 02 Mar 2005
Location: Swindon
Posts: 17
![](templates/vbnew/images/spacer.gif)
![2005 Discovery 3 TDV6 HSE Auto Zambezi Silver 2005 Discovery 3 TDV6 HSE Auto Zambezi Silver](../images/veh/zambezi_silver.gif)
|
faulty park distance control |
|
After 5 years my front park distance control has failed - error message on dash saying it is inactive. Any ideas as to waht has caused this? It beeps all the time and I ahve to turn the switch off which means I can't use the rear sensors....
|
18th Oct 2010 1:50 am |
|
|
Mike767
Member Since: 15 Oct 2008
Location: Congleton, Cheshire.
Posts: 138
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 HSE Auto Lugano Teal 2006 Discovery 3 TDV6 HSE Auto Lugano Teal](../images/veh/lugano_teal.gif)
|
Same here. Car is nearly 5 years old and getting a front PDC inactive message. Any ideas on a fix anyone?
|
15th Aug 2011 8:06 pm |
|
|
Henry08Disco
Member Since: 10 Jul 2011
Location: Canterbury
Posts: 12
![](templates/vbnew/images/spacer.gif)
![2008 Discovery 3 TDV6 SE Auto Buckingham Blue 2008 Discovery 3 TDV6 SE Auto Buckingham Blue](../images/veh/buckingham_blue.gif)
|
Hi My 08 has jest developed a problem, on switching on ignition, get longer than normal beep at rear of sensors, dash switch flashess contently, Select reverse get the same problem but I have no nose for any of the sensors? Anyone able to help? Henry 08 Disco 3
|
13th Nov 2011 5:25 pm |
|
|
Gaznav
Member Since: 29 Jan 2012
Location: UK
Posts: 6
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 HSE Auto Zermatt Silver 2006 Discovery 3 TDV6 HSE Auto Zermatt Silver](../images/veh/zermatt_silver.gif)
|
Yup had this on my 2006 Disco 3 last year. Water in one of the sensors had caused internal corrosion - too much jet washing!
Bought a new sensor and then swapped it out until I found the right one - luckily it came in primer grey so it looks like the other silver ones! It's a s*d of job as the rear bumper has to come off.
|
31st Jan 2012 11:14 pm |
|
|
BLFarrar
Member Since: 02 Aug 2006
Location: Deepest, Dankest, Darkest, Dingiest......Le Halifax, West Yorkshire...with strong links to Ireland
Posts: 6222
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 HSE Auto Lugano Teal 2006 Discovery 3 TDV6 HSE Auto Lugano Teal](../images/veh/lugano_teal.gif)
|
J57C wrote:......A new PDC has to be fitted by a LR Dealer [ it has to be porgrammed in] which is going to be ££££££, so I've opted for an aftermarket kit at about £200. Will keep you posted.
I was told the PDC hasnt got to be programmed in...
they cost £70..00 ish & are a bit awkward to fit (behind rear NS passenger seat)
you need a torx spanner of right size to remove the seat belt anchor point....
My advise is to take to an independant LR providor that has the appropriate test kit...it will identify the problem & its usually a sensor.
I used Four x 4 in leeds - they know what they are doing on most things LR....fixed my PDC for less than £40....I wasted money on a new control box.
If you are convinced that its the PDC control box I have a spare you can try using. Mail me BREXIT - done properly.
Right now ...We need Government - not Politics
Save the Dipstick Flagbearer-keep it simple, less likely to fail campaign-agenda items:Starting Handles, Acetylene Lamps.
Founder: Dipsticks-R-Us Inc
D3 HSE-perfectly formed, passenger friendly...has real DIPSTICK
Jag XK-but sadly no DIPSTICK...HUGE design fault
FL2 has DIPSTICK..."real comfort in rear seats"
VW Golf wondermobile (?)..has real DIPSTICK
Morris Minor..original DIPSTICK technology..and a real KEY.
|
1st Feb 2012 9:54 am |
|
|
ktm_525
Member Since: 23 Apr 2010
Location: Calgary, Alberta
Posts: 141
![](templates/vbnew/images/spacer.gif)
![2010 LR4 5.0 V8 HSE Auto Ipanema Sand 2010 LR4 5.0 V8 HSE Auto Ipanema Sand](../images/veh/ipanema_sand.gif)
|
My front PDC was acting up. Sometimes giving phantom signals and other times not switching on at all. It was resolved when I fitted a new battery to replace the original out of my 06 HSE. It has been 100% since the battery replacement.
YMMV
|
7th Mar 2012 10:00 pm |
|
|
MarkOne
Member Since: 23 Jul 2011
Location: County Antrim
Posts: 3345
![](templates/vbnew/images/spacer.gif)
![2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris Grey 2014 Discovery 4 3.0 SDV6 HSE Lux Auto Corris Grey](../images/veh/corris_grey.gif)
|
I have the same problem on this one i have just bought 2005 D3 HSE with 92k. it's an auto when i put it in reverse it just goes into a high pitch whine as if your close to something. That said it doesn't do it everytime, it seems to me it's just a bad fault with them, the front ones work fine.
|
1st Apr 2012 11:48 am |
|
|
A.J.M
Member Since: 31 Oct 2009
Location: Carluke
Posts: 2832
![](templates/vbnew/images/spacer.gif)
![2016 Discovery 4 3.0 SDV6 Landmark LE Auto Yulong White 2016 Discovery 4 3.0 SDV6 Landmark LE Auto Yulong White](../images/veh/yulong_white.gif)
|
My 04 HSE has started to display a front sensor inactive message if trying to use the sensors.
Was a bit hit/miss for it working yesterday but today it's not working at all.
How loud is the clicking noise they make, going to try and fault find it tonight.
Also, is it a bumper off job to get at the sensors?
|
31st Aug 2012 11:09 am |
|
|