IID Pro MV License - D3, D4 & RRS - Enabling, Updates, D4 & RRS Timed / Remote Climate, D4 Bluetooth fitting
PM me for details
Owner of the original "Beanie" grille
D4 & RRS style D3 grilles made to order
23rd Mar 2014 3:16 pm
NickJ
Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
Excellent to see the collective genius on the forum is nearing to find a solution to this, and on a Sunday too... a day of rest!
23rd Mar 2014 3:32 pm
kestrelpc
Member Since: 09 Nov 2010
Location: Essex
Posts: 114
Landie71 wrote:
Had another look at the Car Builder sheet & it's probably the opposite way round to what we need - i.e. white on clear, whereas we want clear symbol on black background.
Had a quick thought though - there's a printer in the same business centre I've got my business in - I'll pop in in the morning & see if he could print a clear sheet with black apart from the lights-on symbol. He usually likes a challenge - I've given him a few before now!
I repair printers/copiers and was thinking I could probably print these onto a clear acetate type material with a black background, but ideally could do with hi-res digital original images, and an idea as to exactly what size the finished 'clear image' would need to come out at. as I said I am unfortunatly away on holiday for a couple of weeks but will look into this on my return if nothing else has come up.
23rd Mar 2014 3:47 pm
kestrelpc
Member Since: 09 Nov 2010
Location: Essex
Posts: 114
NickJ wrote:
Excellent to see the collective genius on the forum is nearing to find a solution to this, and on a Sunday too... a day of rest!
Rest?, what is this four letter word your using on a public forum, should be ashamed of using language like that
23rd Mar 2014 3:48 pm
NickJ
Member Since: 11 Oct 2010
Location: there's no f in point
Posts: 2137
I have other four letter words used on a Sunday; beer, wine, food...
23rd Mar 2014 3:50 pm
Chris1969
Member Since: 21 Jun 2011
Location: North Worcestershire (not far from Redditch)
Posts: 385
Any use?? Symbol ok??
.. still learning )
Isofix car seat, Isofix baby seat base, crushed carpet crisps, sticky leather seats (next to Isofix car seat), upgraded front rubber cup holder things, wired up USB charge and audio for my iphone, side steps, de-tango'd lights, H7 OSRAM Nighbreakers, LED side lights, LED reverse lights, clear repeaters, Narpy Grill... tools I don't know how to use.... yet..
23rd Mar 2014 4:17 pm
Chris1969
Member Since: 21 Jun 2011
Location: North Worcestershire (not far from Redditch)
Posts: 385
Isofix car seat, Isofix baby seat base, crushed carpet crisps, sticky leather seats (next to Isofix car seat), upgraded front rubber cup holder things, wired up USB charge and audio for my iphone, side steps, de-tango'd lights, H7 OSRAM Nighbreakers, LED side lights, LED reverse lights, clear repeaters, Narpy Grill... tools I don't know how to use.... yet..
23rd Mar 2014 4:20 pm
disco_steve
Member Since: 25 Aug 2009
Location: Are you sure this is the M5 ?
Posts: 1498
Does this one mean OFF, you're TOO CLOSE to my D3 Never get mad - get even !!
06 D3 now gone to family member and still going strong at 265k
previous vehicles:
04 D2 TD5 - (clocked 189k from new)
52 X-Trail 2.2 SVE
various euro boxes !
23rd Mar 2014 6:53 pm
Landie71
Member Since: 23 Oct 2012
Location: Worksop, Nottinghamshire
Posts: 1019
Update - Just be careful doing this
Ok everyone, bit of an update after taking the car out today. The two needles that came out with their metal pins evidently didn't got back in quite as well as I first thought. In my case they were the fuel & temp gauges, but it could be any of them.
Basically it turns out there's a stepper motor that drives a small nylon gear wheel in the "needle motor" on the back of the PCB. It appears that the gear wheel (that the metal pin goes into) might move a little when it's stripped down. When I put the needles back in they felt to locate ok as per the Powerful UK video, but the needles didn't move correctly. In my case the temp gauge went up but not down & the fuel gauge sort of stuttered a bit, but didn't move much.
I was lucky & had the spare instrument console which when I stripped it down had two out of the four that the drive pins stayed with the motors & not the needles so it was simply a case of unsoldering the four connections & swapping them onto my PCB.
Think I'll call that a close shave.
Hope I've not built up too many hopes up but I'd rather be honest & let you all know my experience.
With hindsight (wonderful though it is), it probably is still possible to ease a 15W soldering iron tip to either side of the red LED & piggyback a normal 3mm LED onto it without taking the needles off & risk them not going back on.
Last edited by Landie71 on 23rd Mar 2014 7:46 pm. Edited 1 time in total
23rd Mar 2014 7:00 pm
Chris1969
Member Since: 21 Jun 2011
Location: North Worcestershire (not far from Redditch)
Posts: 385
I don't see anything else it can mean...... In relation to Steves symbol of course .. still learning )
Isofix car seat, Isofix baby seat base, crushed carpet crisps, sticky leather seats (next to Isofix car seat), upgraded front rubber cup holder things, wired up USB charge and audio for my iphone, side steps, de-tango'd lights, H7 OSRAM Nighbreakers, LED side lights, LED reverse lights, clear repeaters, Narpy Grill... tools I don't know how to use.... yet..
Last edited by Chris1969 on 23rd Mar 2014 7:07 pm. Edited 1 time in total
23rd Mar 2014 7:05 pm
Landie71
Member Since: 23 Oct 2012
Location: Worksop, Nottinghamshire
Posts: 1019
Can we get it printed to fit over the brake lights
23rd Mar 2014 7:07 pm
Chris1969
Member Since: 21 Jun 2011
Location: North Worcestershire (not far from Redditch)
Posts: 385
good idea... still learning )
Isofix car seat, Isofix baby seat base, crushed carpet crisps, sticky leather seats (next to Isofix car seat), upgraded front rubber cup holder things, wired up USB charge and audio for my iphone, side steps, de-tango'd lights, H7 OSRAM Nighbreakers, LED side lights, LED reverse lights, clear repeaters, Narpy Grill... tools I don't know how to use.... yet..
23rd Mar 2014 7:08 pm
disco_steve
Member Since: 25 Aug 2009
Location: Are you sure this is the M5 ?
Posts: 1498
Landie71 wrote:
Can we get it printed to fit over the brake lights
Now . . . . that's a great idea
Never get mad - get even !!
06 D3 now gone to family member and still going strong at 265k
previous vehicles:
04 D2 TD5 - (clocked 189k from new)
52 X-Trail 2.2 SVE
various euro boxes !
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
)
OFF, you're TOO CLOSE to my D3 
I don't see anything else it can mean...... In relation to Steves symbol of course 
