Member Since: 01 Feb 2011
Location: Norfolk
Posts: 3171
Certainly the FBH will shut down\not run if the coolant pump isn't running, it's possible that the software is able to detect that the pump run is outside normal limits (no pressure on vanes) and that is throwing it out of kilter.
Another clue is the overheat sensor
I'd definitely connect the coolant lines back up and try again.
Steve
1st Oct 2015 5:26 pm
Sydney
Member Since: 11 Aug 2013
Location: St Neots
Posts: 903
Sounds like its overheated as no pipes were connected.De-Tango
V8 Brakes
EGRs blanked
Running boards
3 flash indicators and clock on dash
Blingy grille...
1st Oct 2015 5:28 pm
Simon.pl
Member Since: 02 Dec 2010
Location: Warsaw
Posts: 224
Cheers Chaps
Had the same feeling - just this "strange" fault was confusing me. Will connect coolant than and will check again.
Wrapped Satin Yellow&Black; Lovells 2" Gas Legend Kit, OME hard springs. ATX 192 17" wheels with Cooper STT M/T tires. ProSpeed Roof Rack & Rear Ladder. Custom made underbody protection, front bumper, rock sliders, spare wheel and accessories mountings, drawer system. WARN 9,5XP Winch. Front and Rear Light Guards, Safari Snorkel. VIAIR X'treme Duty OBA, Traxide USI-160 system, Danhag GSM & IPCU modules, IID Tool BT, James Baroud roof tent and awnings, and air horn for fun
1st Oct 2015 8:56 pm
Simon.pl
Member Since: 02 Dec 2010
Location: Warsaw
Posts: 224
I can confirm - connecting coolant helped and everything came to normal, so clearing the unit helped and EBH works (at least triggered from IIDTool).
Just one thing is not clear - why starting "self test" from the IIDT triggers error E7? Anyone knows what does it mean?Wrapped Satin Yellow&Black; Lovells 2" Gas Legend Kit, OME hard springs. ATX 192 17" wheels with Cooper STT M/T tires. ProSpeed Roof Rack & Rear Ladder. Custom made underbody protection, front bumper, rock sliders, spare wheel and accessories mountings, drawer system. WARN 9,5XP Winch. Front and Rear Light Guards, Safari Snorkel. VIAIR X'treme Duty OBA, Traxide USI-160 system, Danhag GSM & IPCU modules, IID Tool BT, James Baroud roof tent and awnings, and air horn for fun
14th Oct 2015 3:00 pm
Malc3667
Member Since: 23 Nov 2015
Location: Loughborough
Posts: 15
Hi Folks,
Just got my first D3 (2006 HSE)
I have read and read posts about FBH and I don't particularly want to take it apart if I don't need to so.....
1) IS THERE ANYONE NEAR LOUGHBOROUGH THAT CAN RUN THE DIAG SOFTWARE FOR ME PLEASE?
[and pref get mine FBH working] - Beer tokens can be made available
OR
2) Is there a definative list of the parts required / hardware, inorder to run the software in WINDOWS 10 ?
TIA
Malcolm
23rd Nov 2015 2:07 pm
nutter123
Member Since: 26 Jan 2013
Location: Glasgow
Posts: 28
Thanks! I had the same problem, but connected the coolant lines and VOILA!
26th Nov 2015 6:04 pm
Malc3667
Member Since: 23 Nov 2015
Location: Loughborough
Posts: 15
All sorted now thanks.
Usb to obdc cable purchased, wired connection made to fbh and software ran.
Cycled everything a few times and cleared down any faults.
Run upto 85
26th Nov 2015 9:41 pm
nick2506
Member Since: 22 Nov 2005
Location: Chesterfield
Posts: 27
Fuel pipe from tank to fbh pump just about totally blocked.
Spent ages with a v large metal srynge sucking and blowing with all my strength just to get a few drops of diesel through.
Also tried my tyre compressor without success.
The pipe must be trapped somewhere ?
Was thinking of pushing some welding wire through to unblock it.
I suppose I could destroy the mesh filter in the tank so a bit wary of attempting that.
Next task may be to drop the tank and investigate.
Any other suggestions ?
Thanks Nick
5th Dec 2015 2:26 pm
jobster
Member Since: 08 Jul 2012
Location: Hilversum
Posts: 591
OK peeps, before I kick this car under the b@tt: under all (!) right conditions FBH sometimes fires up, sometimes not. WTT test always runs perfect, no faults at all. IIDToool fault code B1D29-93 when it does not fire up. New battery (Exide EA1000), FBH 1 year old bought new from Dan@Duckworths. When it cuts out it's after 2-3 mins, glowplug around 50%. Did a prime, lot's of smoke, flawless operation in a few mins. Any thoughts?RLD Sump Guard
GVIF & rear camera
New FBH via Dan
BAS Remap with IIDTool
22nd Jan 2016 9:26 pm
jobster
Member Since: 08 Jul 2012
Location: Hilversum
Posts: 591
To add to this, WTT sometimes does not detect the FBH, unplugging the power (the 2 pin on the righthand side) and plugging it again "wakes it up" or so it seems. Tests are perfect so really suspect a power issue/bad ground perhaps.RLD Sump Guard
GVIF & rear camera
New FBH via Dan
BAS Remap with IIDTool
23rd Jan 2016 11:34 am
The Other One
Member Since: 27 Jan 2017
Location: Kent
Posts: 1
FBH Working!
Had my D3 since May 2016 and never noticed that the FBH wasn't working until a guy I work with said about his and the smoke it produced.
After scanning this forum and reading up on the FBH, I purchased the loom from the DISCO3 store and downloaded the Webasto WTT software. Tonight I connected up and the FBH showed 3 faults. A low fuel and 2 no starts. Cleared faults and tested it by selecting Park Heating.
After a small cloud of smoke, the FBH ran up and stayed running. Cycled of and repeated several times......IT LIVES
Thanks to everyone who has investigated this and provided answers.
27th Jan 2017 6:07 pm
GvLR3
Member Since: 21 Dec 2016
Location: Zagreb
Posts: 6
Hi
Please is someone know ?
I put in car GPS Webasto Altox 5 and I turned on Webasto all work until I open door or unlock car ?
2nd Feb 2017 6:45 am
leroymusic00
Member Since: 12 Jan 2021
Location: Carlisle
Posts: 143
Disco 3 FBH live wire
Hi - Is there a live wire that I can test by going straight to the battery to see if the unit kicks in at all?
I have bought an Autel code reader on the understanding that it would unlock my fbh, but to no joy.
2nd Mar 2021 1:57 pm
Admirable
Member Since: 19 Jul 2015
Location: Fife
Posts: 1039
GvLR3 wrote:
Hi
Please is someone know ?
I put in car GPS Webasto Altox 5 and I turned on Webasto all work until I open door or unlock car ?
Yes, the Webasto will switch off once the door is opened. It will start again when the engine is running.
2nd Mar 2021 3:45 pm
leroymusic00
Member Since: 12 Jan 2021
Location: Carlisle
Posts: 143
FBH loom
Hi - I've just bought a kit from the shop which consists of the blue USB / OBD connector,and the black and white connectors. I'm a little confused as to what goes where. Also, I'm using a Mac - can anyone point me in the right direction for a comprehensive guide AND a Mac version please?
Thank you
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
