Member Since: 18 Aug 2013
Location: london
Posts: 6
From manual to Electric Seats
PLEASE HELP...
HI! people.. my this is my first post.. I Just bought a 2007 tdv6 commercial disco 3, it had 2 front manual seats.. today i got the whole set of 7 seats (electric) all are working except the driver one,
the loom to send the power to the motors works but the relay to send power to the switches doesnt match.
I have been to the few agents/dealers all they had to say was the vehicle was built commercial nothing they can do. Sad
Any tricks or ways to sort out the situation will appreciate.
Thats all, thanks
20th Aug 2013 12:21 am
dsd1036
Member Since: 27 Feb 2010
Location: Surrey
Posts: 2692
Member Since: 04 Dec 2011
Location: Buskeud
Posts: 681
Looking at the wiring diagram, check that you have a fuse in 29. should be a 30amp one
This one goes to relay for the power to the Rh seat.
and fuse 54 a 5amp both these goes to the Memory control module.
Check that you have GND on pin 17 and 2 on the module, black wire
You should read 12v on pin 1 on the module a brown wire with green trace. thats battery power
check if you have 12v on pin 4 too. this wire is white with a red trance
So check for 12v on pin 1 and pin 2 these are 2.5 thick
As you have the commercial you will not have the necessary ECU's on the vehicle to just plug the drivers seat in and it works . I assume you have a drivers seat with the memory buttons so to get the drivers seat to function you need to bypass the memory module . Once you have done that the drivers seat will be adjustable in bursts of 5 second duration - does not sound long but more than adequate to adjust as & when required.
If you PM me I can walk you through what's required wiring wise - one day I must post a how to on this time permitting
N.B: I am about to depart for parts foreign for several weeks so be quick .....
20th Aug 2013 9:33 pm
BIGDISCO
Member Since: 18 Aug 2013
Location: london
Posts: 6
From manual to Electric Seats
thankx man i wil try doing it tht way n give a feedback, thankx a lot
11th Sep 2013 2:12 am
k1maney
Member Since: 04 Jan 2014
Location: London
Posts: 5
Memory Module Bypass
Hi,
I am trying to upgrade mine from clothe manual to leather electric ones and Pasager seat worked straight away but the driver needs the memory bypassed.. does anyone know which wires I need to connect..
7th Jan 2014 11:42 am
Luci_p
Member Since: 06 Feb 2021
Location: Stoke-on-Trent
Posts: 1
Hi. I want to convert the seats in my new van, anyone can tell which are the power wires on L462 seats. Much appreciated your help
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum