Member Since: 05 Jan 2010
Location: Surrey
Posts: 218
P0196 Oil Temp Sensor
Checked the fault codes today and got this, would explain why the gearbox has been acting up.
Anyone got a guide to replace this? Easy change or a dealer visit, thanks for any help..
5th Aug 2013 2:26 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20817
If it's the engine oil temp sensor, then it's a doddle to change. You might want to consider an oil and filter change as the same time, as the sensor sits low down in the sump pan.My D3 Build Thread
Member Since: 05 Jan 2010
Location: Surrey
Posts: 218
Disco_Mikey wrote:
If it's the engine oil temp sensor, then it's a doddle to change. You might want to consider an oil and filter change as the same time, as the sensor sits low down in the sump pan.
Thanks so it cannot be done without an oil change??
5th Aug 2013 5:45 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Well the oil is going to come out when you remove the sensor (a really easy DIY job; 20Nm for the new sensor). You can do the boy vs dyke trick with the engine cold to minimise the loss and then top back up. But as Mikey says if you are more than a 3rd through you oil change period then I would turn the event into a mid-service oil change.
Land Rover - Turning Drivers into Mechanics Since 1948
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
