Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
wires
Member Since: 13 Apr 2007
Location: Mittagong
Posts: 5
![](templates/vbnew/images/spacer.gif)
|
LED trailer lights blinking |
|
G'day all
Yes the LED trailer lights blinking problem has been solved for all of us.
PulseShunt from labtronx.com.au does work well.
Regards
wires
|
13th Apr 2007 8:28 pm |
|
|
wires
Member Since: 13 Apr 2007
Location: Mittagong
Posts: 5
![](templates/vbnew/images/spacer.gif)
|
G'day All
I have been experimenting with IRFs suggestion that a 470 ohm resistor and a 1000 microfared capacitor will fix the blinking trailer indicator LEDs. I have tried different resistances and capacitances connected in different ways and I can stop the blinking but then the turn signals do not get to the LEDs either???
Have I missed something?
Confused as usual.
wires
|
19th Apr 2007 9:07 pm |
|
|
christyler
Member Since: 31 Dec 2005
Location: Cork, Ireland
Posts: 1168
![](templates/vbnew/images/spacer.gif)
![2006 Discovery 3 TDV6 S Auto Zambezi Silver 2006 Discovery 3 TDV6 S Auto Zambezi Silver](../images/veh/zambezi_silver.gif)
|
wires wrote:
Have I missed something?
No you missed nothing,
it wont work. a LED is a diode. you cannot shunt a pulse from this setup using only a resistor and a capacitor of any value. CLUB "Ah Shor it'll be grand"
First D3 in the World with a Hydraulic Winch.
2006 Disco 3 TDV6 S Auto,
Diff Locks, Turbochipped, Raised Air Intake, 220volts Onboard, Onboard Compressor, Large Bore Exahust, Underbody Protection, One or two Other Mods as well.
Other toys include, Argo Avenger 8x8, Tatra 6x6 Motorhome (Being Built)
|
20th Apr 2007 12:53 am |
|
|
wires
Member Since: 13 Apr 2007
Location: Mittagong
Posts: 5
![](templates/vbnew/images/spacer.gif)
|
G'day Chris
AHHH!! another wasted bit of life chasing wild geese. So what's new?
Didn't think I missed something that simple when I was doing the R&D for the PulseShunt.
PulseShunt does work for the Disco 3 and the RRS and I am just finishing the R&D for PulseStop for the New Range Rover.
Thanks for the reassurance.
Best regards
wires
Last edited by wires on 20th Apr 2007 7:55 am. Edited 1 time in total
|
20th Apr 2007 7:35 am |
|
|
caverD3
Member Since: 03 Jul 2006
Location: Oberon, NSW
Posts: 6922
![](templates/vbnew/images/spacer.gif)
![2012 Discovery 4 3.0 SDV6 SE Auto Fuji White 2012 Discovery 4 3.0 SDV6 SE Auto Fuji White](../images/veh/fuji_white.gif)
|
“There are only three sports: bullfighting, motor racing, and mountaineering; all the rest are merely gamesâ€
Ernest Hemmingway
D4 3.0 Active Diff, Adaptive Lights, High Beam Assist, Surround Cameras, Privacy Glass.
D3 2.7:Adaptive Headlights,Electronic Rear Diff,ARB Bar,Blaupunkt Speakers,JVC Powered Subwoofer,Removable Snorkel,Mitch Hitch,Pioneer After Market Head Unit,Steering Wheel Control Adaptor,Remote Adjustable Supension Rod System, Taxside Dual Battery System.
|
20th Apr 2007 7:45 am |
|
|
Muzza
Member Since: 24 Sep 2007
Location: Sale
Posts: 10
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 4.0 V6 Petrol SE Auto Atacama Sand 2007 Discovery 3 4.0 V6 Petrol SE Auto Atacama Sand](../images/veh/atacama_sand.gif)
|
I am a technician and I have looked at the problem very closely.
Firstly, the discussion suggesting that a resistor can be used to load the pulse will only fix half the problem. A resistor (or even a globe) in parallel with the LEDS will make the car think the trailer is there and make the required changes to the cars behaviour but the flashing will continue. A time delay is required to stop the flashing.
I have built a circuit that covers both. I have it built into a cable with plug and socket so it is like an adaptor.
I would consider building a few and selling them if there is a need. If the EARTH was flat I would not need my DISCO 3
|
31st Mar 2008 3:27 am |
|
|
wires
Member Since: 13 Apr 2007
Location: Mittagong
Posts: 5
![](templates/vbnew/images/spacer.gif)
|
G'day Muzza
Parallel universe.
I have applied for patents on this in the UK, USA and Australia. I would suggest that you did not manufacture and sell these as it could be seen to infringe my patent rights.
I have also developed PulseBusta which is either trailer mounted (version C) or fitted in the cable (version B). Both will soon be on my new website but limited pre-production units are available.
Keep up the good work in troubleshooting this type of problem only you are about two years late on this one.
wires
p.s. I can e-mail you (or anyone else) the details if you give me your e-mail address
|
31st Mar 2008 6:20 am |
|
|
Muzza
Member Since: 24 Sep 2007
Location: Sale
Posts: 10
![](templates/vbnew/images/spacer.gif)
![2007 Discovery 3 4.0 V6 Petrol SE Auto Atacama Sand 2007 Discovery 3 4.0 V6 Petrol SE Auto Atacama Sand](../images/veh/atacama_sand.gif)
|
Strange,
I have been building electronic gadgets for 35 years and wonder how many patents I should have. I don't understand how can you patent hooking a couple of components together to achieve a result. I am using commonly available components and using common electronic principals. The tricky bit was finding out what the D3 was up to so I could fix it. I have fitted it as permanent to a couple of trailers and made in line units for multi trailer use. I did not really need to invent anything to acheive the result so maybe yours is different. If the EARTH was flat I would not need my DISCO 3
|
31st Mar 2008 10:41 am |
|
|
wires
Member Since: 13 Apr 2007
Location: Mittagong
Posts: 5
![](templates/vbnew/images/spacer.gif)
|
G'day Muzza
Perhaps you should have quite a number of patents yourself by now. I found the first one to be very expensive as I used a patent attorney and it cost about AUD25,000.00 - about ten thousand UK pounds!!!! I have since read up a good bit and do them myself for a fraction of that cost. Money cost - the 'brain burn' is what really hurts.
I am still negotiating with the UK Patent office for the patent and I am ever hopeful of getting one. Very soon now I do believe. Each one takes a couple of years to get through.
Go to www.ipo.gov.uk and search for GB0617271.2
Do investigate patents - could be a good earner for you too! But It has to be something new - new - new.
wires
|
31st Mar 2008 5:26 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.