- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
irimi
Member Since: 21 Sep 2011
Location: istanbul
Posts: 54
  
|
| Remote control T91 for FBH |
|
Morning folks,
I have some questions regarding the remote control.
Has any one installed the remote control T91 for the FBH? I am thinking of buying one but does it come as a kit? Would it also control the cabin fans? Is the Disco 4 kit ready?
Thanks 2005 Disco 3 TDV6 HSE, 2.5" Johnson Rods lift kit, 265/70R17 Mickey Thompson MTZ tires, Heavy Duty front axles, 12.000 lbs discrete mounted winch, Mantec Sump guard, LR Raised Air intake, Albrecht 6890 CB Radio, Superchips ECU remapped, Sprint Booster Throttle Response, K&N air filter, Waeco fridge, 42" & 23" LED bars, Britpart rock sliders....
|
 10th Jul 2012 6:15 am |
|
|
hexf
Member Since: 29 Dec 2010
Location: Suffolk
Posts: 20
|
I've been looking at that too, seems to send signal on wbus wire like oval timer so i guess i would but it seems all quiet from anyone who's tried fitting one, 
|
| 27th Oct 2012 10:36 pm |
|
|
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
|
I've. Fitted them 
|
| 28th Oct 2012 8:08 am |
|
|
wiggs
Member Since: 03 Sep 2006
Location: Manchester
Posts: 14372
  
|
What in a D3 ???? G4 Gone ...but not forgotten
|
| 28th Oct 2012 8:29 am |
|
|
cold_n_wet
Member Since: 05 May 2009
Location: Bergen
Posts: 1509
|
I have been told you can get a W-bus signal out of a T-91, but it will only trigger the FBH to start, you may possibly need a 1533 timer aswell to keep it running for 30 minutes. All of this is 2nd hand knowlege, so I cannot confirm.
If you want fans to start like the D4 then its alot more work involved.
Glen IDTOOL PRO / Faultmate programing and BAS remaping services in Norway.
Diagnostic for most Land rover vehicles
Land Rover parts and accessories.
Stockist of RLD equipment.
www.praesto4x4.no
D4 gone, missed but replaced with a 110 Puma.
|
| 28th Oct 2012 8:45 am |
|
|
geoff.
Member Since: 24 Jan 2010
Location: West kent
Posts: 8531
|
wiggs wrote:What in a D3 ????
 didn't notice what section it was in 
ps notice to myself check what section first
|
| 28th Oct 2012 10:17 am |
|
|
hexf
Member Since: 29 Dec 2010
Location: Suffolk
Posts: 20
|
Hi all,
not too bothered about the fans working, just dont want to wait 20 mins for the heater to start blowing warm air like last winter.
Just to be clear before i lose my £150 notes , do they work in a D3 or do i have to buy the Landrover upgrade and get a D4? 
Also if they just turn the FBH on will another remote button press or when the water system gets to temp turn the FBH off? The Webasto blurb on the T91 seems to say you can program different lengths of burn.
Thanks, H
|
| 28th Oct 2012 12:06 pm |
|
|
cold_n_wet
Member Since: 05 May 2009
Location: Bergen
Posts: 1509
|
To be honest the cost of the T-91 and the options it gives contra buying a controller from Pete bell is a no brainer IMHO.
I sell Pete's kit in Norway, so some may say I am biased, or are just pushing his kit.
But I have a couple of T-90 controllers sitting her and its just a remote, it sends a signal back to say the commands have been recieved.
The Bell kit can do more, so rather than I make a commercial rant, if your are interested in an alternative controller, I suggest that you may want to search the site for Bells Fuel burning heater intelligent controller, i'll let you make your own mind up.
HTH
Glen IDTOOL PRO / Faultmate programing and BAS remaping services in Norway.
Diagnostic for most Land rover vehicles
Land Rover parts and accessories.
Stockist of RLD equipment.
www.praesto4x4.no
D4 gone, missed but replaced with a 110 Puma.
|
| 28th Oct 2012 1:07 pm |
|
|
Narpy
Member Since: 18 Jul 2011
Location: Stockport
Posts: 7830
|
I don't think they do work in a D3 which was why Wiggs was asking. 
You still have options however, without going to the expense of a D4.
In short, there's generally 2 common D3 upgrades ( I know there's others but these are the obvious two) :
Firstly fit a Bell Autos system. Off the shelf, ready to go unit that is well recommended and tried and trusted.
Secondly, make and fit your own system based on a Webasto 1533 oval timer.
Both systems will pre-warm your engine, by running the FBH, for a set amount of time, usually 30 mins or 45 minutes depending on how you configure your install.
All the info and links are here: http://www.disco3.co.uk/wiki/index.php/Fuel_Burning_Heater Mods:
Front Fogs + Halos
FBH Remote Control
The 1st Ever RRS Modded Grill
Garmin Nuvi + D4 Surround + Reversing Camera.
D4 Steering Wheel.
Rear Boot Spoiler.
Twin Brake Lights.
Wing Mirror Indicator Repeaters.
Long Roof Rails
Make your own Narpy grill thread
I'm not scared, I'm outta here.
|
| 28th Oct 2012 1:12 pm |
|
|
hexf
Member Since: 29 Dec 2010
Location: Suffolk
Posts: 20
|
Hi, Thanks for all the advice , I've just ordered a Bell system, I dont think i need to reinvent the wheel and the T91 controller will mean messing about with the Webasto in the future probably when its bloody cold 
The advise on this site make the difference between liking my Disco and buying a Volvo! 
|
| 30th Oct 2012 12:31 pm |
|
|
MarkOne
Member Since: 23 Jul 2011
Location: County Antrim
Posts: 3345
 
|
A Volvo 
|
| 30th Oct 2012 12:37 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2025 Futuranet Ltd & Martin Lewis
|
|
