Member Since: 06 Nov 2007
Location: Deepest Darkest Berkshire
Posts: 696
Do faulty EGRs get better or am I kidding myself....
This week my yellow EML light came on, car went all hesitant and my BAS interface reported the fault codes for EGR failure, (P045C/D). Annoying, but not unexpected I guess. So, D3 booked in next week at local independent to get them looked at (mines an MY08 so they can't be blanked) and started driving the wife's car leaving the D3 to rest....
This morning, I went to move the D3 and the EML light went out. Curious, I took the car for a spin and the hesitancy was gone.. Falut codes are still there though (I did not try to clear them previously).
Is that expected? I thought that when the EGR's go kerput then that was that. Or could it be that they are a little sticky and will give-up the ghost again any minute now...Also Gone : MY14 D4 SDV6 HSE : Barolo Black + Almond
Sadly Gone : MY08 D3 TDV6 HSE : Stornoway + Alpaca + Privacy + BAS Remap
18th Feb 2012 2:02 pm
Pelyma
Member Since: 06 Jan 2005
Location: Patching, Sussex
Posts: 15496
That happened with mine, still had them blanked thoughDS3 TDV6 HSE - Silver with Alpaca (old one) Gone
DS3 TDV6 HSE- Silver with Alpaca (new one) Gone
D4 HSE Lux - Montalcino Red Gone
Porsche Cayenne V8 Diesel S
18th Feb 2012 2:06 pm
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
Yes, they'll stick on and off for a short while if you're lucky, but it's a clear sign they'll fail. You can blanco yours but will get the EML back on if you do and fail its mot for it. Best to replace it I'm afraid. Bodsys Brake Bible
Clock/ SNOTM /3Flash / 4x4Info /BT Update /Service Reset/Error Codes / Gearbox Reset See It Here
18th Feb 2012 2:18 pm
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8243
Mix 2 stoke (semi synthetic, low ash) oil in the diesel at a rate of 200/1 or or stronger(100/1) for the first tank full and go for a good run. Good chance it will clear them and give you more mpg.It can when others can't,
It will when others won't,
It goes where others don't.
18th Feb 2012 3:55 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20853
If it has logged a fault code, and the EML has come on, it will stay on until the engine management has 3 clean starts, with no faults logged. My D3 Build Thread
Member Since: 06 Nov 2007
Location: Deepest Darkest Berkshire
Posts: 696
thanks all - I think that i'll try the 2-stroke trick and then if the EML comes back on I'll get them done.Also Gone : MY14 D4 SDV6 HSE : Barolo Black + Almond
Sadly Gone : MY08 D3 TDV6 HSE : Stornoway + Alpaca + Privacy + BAS Remap
20th Feb 2012 11:51 am
maplecottage
Member Since: 01 Feb 2011
Location: Norfolk
Posts: 3171
I havent seen this stuff anywhere else....BREXIT - done properly.
Right now ...We need Government - not Politics
Save the Dipstick Flagbearer-keep it simple, less likely to fail campaign-agenda items:Starting Handles, Acetylene Lamps.
Founder: Dipsticks-R-Us Inc
D3 HSE-perfectly formed, passenger friendly...has real DIPSTICK
Jag XK-but sadly no DIPSTICK...HUGE design fault
FL2 has DIPSTICK..."real comfort in rear seats"
VW Golf wondermobile (?)..has real DIPSTICK
Morris Minor..original DIPSTICK technology..and a real KEY.
21st Feb 2012 9:26 am
sean 471
Member Since: 26 Apr 2011
Location: Sheffield
Posts: 2990
There was a previous thread about the spray. With some caution attached. Seem to remember somebody put some in and the engine reved alarmingly.
21st Feb 2012 9:35 am
maplecottage
Member Since: 01 Feb 2011
Location: Norfolk
Posts: 3171
As with all things - follow the instructions !! It's not really a DIY product, is aimed at the 'professional' market but..........It clearly states that engine revs will increase, and it tells you how to manage that; can't blame anybody else if user is not prepared to read the info properly
Link is the manufacturers UK agent (trying to keep mods happy ) - up to you to source your own supplier (well known auction site ??)
There's also plenty of info / video footage on YouTube.
21st Feb 2012 9:45 am
ThatMartinChap
Member Since: 06 Nov 2007
Location: Deepest Darkest Berkshire
Posts: 696
Thanks - the EGR cleaner looks like a good thing to try.
Sorry to be a dunce, but where exactly does this get injected on the D3. i.e. What do I need to dismantle on the D3 to spray it in ?Also Gone : MY14 D4 SDV6 HSE : Barolo Black + Almond
Sadly Gone : MY08 D3 TDV6 HSE : Stornoway + Alpaca + Privacy + BAS Remap
21st Feb 2012 11:06 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
I've posted about Wynn's EGR spray in the past. It worked for me and rev control was not difficult - the wife managed it!
Whilst it did cure my problem I still blanked them 6 months or so later. Seeing all the crud that comes through the EGR system into the intake prompted me to skip the lot and fit a BAS blanking plate. For those who cannot blank then EGR spray, especially as a preventative measure, it seems a wise investment. The EGR system is designed to take dirty exhaust crud and chuck it back into the engine so its only a matter of time till the gunk blocks them up. Cleaning them is good!Land Rover - Turning Drivers into Mechanics Since 1948
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
) - up to you to source your own supplier (well known auction site ??)
