Member Since: 20 Nov 2011
Location: chicago
Posts: 24
D3 V8 HSE - 17inch
hi everyone
i have a 2005 Disco 3 HSE V8
i want to put 17 in inch rims on it (steel) for off road and keep the 19s for the road
is it true i need different calipers (for the front or both?)
if it is, is this difficult to do? (can i do it myself?), how expensive? second hand? and is it easy enough to do each time or would i get the smaller callipers and leave them on? will i notice the difference in performance on the road?
thanks for your help
i am located in australia if that changes anything
cheers
12th Jan 2012 11:05 am
Bodsy Site Sponsor
Member Since: 06 Nov 2006
Location: In the Clubhouse
Posts: 21361
A lot of people upgrade from the std TDV6 Caliper Carrier brackets (and of course Disks) to the V8 ones you have. The V8 ones are better, so downgrading to the TDV6 you will notice some braking performance degradation.
ISTR that someone did some 18" steels either in Aus or in SA. that fitted, but I'm pretty sure you won't find 17" rims to fit with the existing disk setup.
You can of course change them yourself, follow the guidance in the Brake Bible in my signature below and just substitute the disks and caliper carrier bracket. Those are the only difference, the pads and sensors are the sameBodsys Brake Bible
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum