Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4430
B pillar / door frame trim removal?
Can anyone tell me how the black trim is attached to the door frame? As far as I can see it is a separate component.
Click image to enlarge
Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
16th Jun 2024 7:46 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4819
There's a small screw on the inside of the door at the opposite side of the black trim.
(window trim)yµ (idµ - eAµ) ψ=mψ
16th Jun 2024 8:51 pm
rrhool
Member Since: 28 Aug 2014
Location: Norfolk
Posts: 4430
In case anyone else ever needs to know, the black trim is stuck on with a single long strip of VHB. I tried heat from a hot air gun, but I'm sure the bond was designed to withstand heat from direct sun. I couldn't get it hot enough to release the adhesive for fear of blistering the paint.
A thin bladed scraper, or knife about 3" long will get to the foam tape from the glass side of the trim, then just pierce the tape all the way down until the trim falls off! Easy!
Click image to enlarge
Click image to enlarge
Click image to enlarge
Richard
D3 SE 2007. Triumph 2.5Pi 1973. Ferguson TEA20 1948.
Discovery 2 4.0 ES 2001- Gone
Discovery 1 300Tdi ES '95 - Gone
Range Rover Classic '79 - Gone
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
