Member Since: 02 Aug 2023
Location: Durham
Posts: 45
Rear fuel pump belt snapped?
So another day another problem .... Posting this while waiting for recovery.
I was driving the d3 today 05 tdv6. And the car cur out. No noises just stopped. Checked with the gap tool and it mentioned Injector control pressure too low.
Had a poke about and found the following belt snapping at the back of the engine near the top behind a black case.
Can anyone confirm which belt it is.Im hoping it's not catastrophic.
Click image to enlarge
Click image to enlarge
[
19th Nov 2023 6:37 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20840
Member Since: 06 Mar 2017
Location: Lost
Posts: 5042
It's not catastrophic just the hpfp belt. New belt and tensioner and it will be fine. The date of manufacture might be on it or it will be stamped into the tensioner when you get it off.
I'm raising the date because if it's been fitted when the front timing belt was done that would be catastrophic if that fails!yµ (idµ - eAµ) ψ=mψ
19th Nov 2023 6:55 pm
Akers
Member Since: 02 Aug 2023
Location: Durham
Posts: 45
Thank god. Typical I just got it back on the road after replacing the crossover pipe!
I'll check for a date on the belt. Thanks for the quick reply guys.
It would be interesting for the record to know its age and the mileage it has covered.
19th Nov 2023 7:24 pm
Akers
Member Since: 02 Aug 2023
Location: Durham
Posts: 45
No problem,
I'll update once I get it off finally got it recovered home at 3am after calling the RAC at 17:30.. only needed to go 10 miles!
20th Nov 2023 12:11 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5042
It that what they call a breakdown service? You'd have pushed it there in less than half that time yourself. yµ (idµ - eAµ) ψ=mψ
20th Nov 2023 3:11 pm
Akers
Member Since: 02 Aug 2023
Location: Durham
Posts: 45
oh it was a saga that involved one of the recovery trucks having to be recovered at 2am..
20th Nov 2023 3:14 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5042
Presumably that was the AA then? yµ (idµ - eAµ) ψ=mψ
20th Nov 2023 3:18 pm
defector
Member Since: 23 Feb 2009
Location: Greater Manchester
Posts: 1471
Give the RAC hell, they all make excuses.
Similar happened to my son with the AA, managed to get a few hundred pounds from them for our 'inconvenience '.
20th Nov 2023 4:45 pm
Akers
Member Since: 02 Aug 2023
Location: Durham
Posts: 45
Oh I will. If nothing else, it will make me feel better about sitting freezing on top of the Pennines for 10 hours.
I've had a quote to replace it for £250+vat do you think it's worth tackling myself or for that price just let the garage do it?
20th Nov 2023 5:07 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10674
if you are tall, with thin arms and like lying on top of the engine, then do it yourself
20th Nov 2023 5:40 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 5042
If you're experienced in doing this type of maintenance (2hrs) it won't phase you too much. If not, maybe best leave it to someone used to doing them.
Member Since: 02 Aug 2023
Location: Durham
Posts: 45
So, the rear belt and tensioner is off. I think the milage question is irrelevant. I melted it when using the acetylene to remove a bolt during the crossover pipe repair!
I'm going to order the part today, but the only concern is with the belt already off is there a way to establish which way it needs to go on. The original direction of travel?
It does not really matter with a new belt, but I always fitted them with the text facing me. looking at the rear cover you might struggle to get that back in position, when fitting it back.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
