Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
rac060804
Member Since: 25 Jun 2018
Location: Tamworth
Posts: 73
|
Disco 3 ride height calibration |
|
Hi all
My disco is ridding a little high and I need it resetting, the rears are around 502mm instead of the 485
Can anyone recommend anywhere near Tamworth to have this done
Thank
|
2nd Jul 2022 9:35 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10628
|
But an autel ap200 white
And do it yourself
£45-65 ish
|
2nd Jul 2022 10:26 pm |
|
|
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1260
|
Deffinately get yourself an Autel, not just for this but it’s the must have for the glove box I’m only down the road and can probably do it for you but wouldn’t be till next weekend 2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
|
2nd Jul 2022 10:54 pm |
|
|
rac060804
Member Since: 25 Jun 2018
Location: Tamworth
Posts: 73
|
Hey both
Thank you for the reply’s….. for that price it’s definitely worth buying one…. I always thought you had to spend hundreds to buy a reader for calibrating the suspension…
Is it easy to do with the Autel ?
|
2nd Jul 2022 11:05 pm |
|
|
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1260
|
It’s like everything else on the D3, can be easy, depends what day of the week and whether the car woke up happy . You mainly need a flat parking space and a good ruler
Have a read of a couple of posts on here
https://www.disco3.co.uk/forum/suspension-...suspension 2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
|
2nd Jul 2022 11:24 pm |
|
|
rac060804
Member Since: 25 Jun 2018
Location: Tamworth
Posts: 73
|
How we love them. Lol
I’m just watching some YouTube videos on them…. They look bang on for the price
|
2nd Jul 2022 11:28 pm |
|
|
KevinD3
Member Since: 05 Aug 2020
Location: Sutton Coldfield
Posts: 1260
|
Tbh, they’re a no brainer, if nothing else a garage will charge you £40 / £60 for a code scan so it pays for itself, and there’s always something you need to check.
They’ll do the suspension, steering, code new keys and a few other service items, so more than a code reader. 2008 HSE Stornoway Grey
My Wife thinks the D3 is a hobby, The D3 thinks the wife is 💕
|
2nd Jul 2022 11:30 pm |
|
|
rac060804
Member Since: 25 Jun 2018
Location: Tamworth
Posts: 73
|
Well, the new reader was ordered and it was delivered today, and like all guys with a new toy, I was straight outside after work and seeing what magic we could perform…
After a couple of calibration attempts, the reader came up with calibration success….. woo hoo
Well, it was a short success as when I started the engine, the red warning light came on the dash board (it’s never been there before). Error code c1A00-54
I’m hoping another re calibration will work, if not then I’ve screwed up proper.
|
4th Jul 2022 9:22 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10628
|
Somehow you need to tell the car (with the tool) that calibration is complete and to reactivate normal mode.
This is what the red light means.
Don’t know how on the autel. Just be sure to do the whole process and don’t finish early
|
4th Jul 2022 9:42 pm |
|
|
Flatlander
Member Since: 20 Jul 2015
Location: Here
Posts: 575
|
That code is set if the vehicle is in 'tight tolerance mode' - the calibration is there, but overridden.
I have no idea how the Autel accesses TTM, clearly it does somehow, you 'just' need to get it back into normal mode.
|
4th Jul 2022 9:51 pm |
|
|
rac060804
Member Since: 25 Jun 2018
Location: Tamworth
Posts: 73
|
Hi all,
So, got home, plugged in and played…. Ttm, appeared to be on, managed to get that into normal mode and calibrated the height with success !! Thank you for the advise
I pulled up outside my house and measured and it still seems higher than the 485 on the rear, but I’ll give it a few weeks and try again.
Driving her does seem better, not as wollowy as before so that’s a real bonus
|
5th Jul 2022 7:47 pm |
|
|
Globetrotter448
Member Since: 21 Mar 2017
Location: Londonderry NSW
Posts: 1807
|
One more calibration should fix it. Measure at least twice before accepting. Bounce the car a couple of times as well then remeasure.
|
11th Jul 2022 8:47 am |
|
|
rac060804
Member Since: 25 Jun 2018
Location: Tamworth
Posts: 73
|
Well I’m pleased to report it seems to have worked, measurements are looking good, car sits nice and no longer is she bouncing like before…
|
11th Jul 2022 1:19 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.