Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4197
RRSTDV8 wrote:
Global Puffin wrote:
For those of us who work in engineering, regressing to Imperial would be awful.
There are only three countries that use non-metric and of those, the Yanks actually do use metric they just convert it to US Customary system.
And for those that remind us that the UK uses Imperial measurements still in some circumstances, they are all based on the metric equivalent (thanks to the Weights and Measures Act) 1985.
Well I for one know far it is to all my regular destinations in miles, I know how few miles to the gallon my D3 does I know how tall I am in feet and inches, I know how much I weigh in pounds and stones and know the size of my feet in regular sizes … who else falls into this category? I’m not suggesting for a minute we go back to pre-decimal money but some things will not change for me..
And it’s also important as to who holds the glass as well as what’s in it I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
I am a 37yo millennial. In my head I measure distance driven in miles but distance ran (for fun) in kilometers. I know my weight in kilograms. I order my shoes off the internet so usually have to order in EU sizes. My D3 V8 is an Aussie import so tells me my fuel economy in km/100l but I have to covert it to mpg so I can put it in perspective!
I am currently on an oil rig (off Aberdeen) where we are measuring lengths in decimal feet of all things!! But we use millimeters for fine measurements rather than decimal inches or fractions of inches. But we do measure diameters of pipe in fractions of inches... But that's all because it's an American industry.
When we announced the births of our kids I told all the boomer grandparents, aunts and uncles the babies' weights in kilograms just to annoy them. 2005 D3 V8
2010 MX-5
www.instagram.com/global_puffin
29th May 2022 4:42 pm
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23592
DG wrote:
So is the entire hospitality sector going to replace their glassware before the end of the week? I think not.
Does anyone, other than those who are the most likely about to expire, care, I think not.
Click image to enlarge
I am sure that the Mail faithful will lap it up, but it is utter nonsense.
Quote:
An EU directive, which took effect in 2006, required the use of an EU-wide "CE" mark which stands for Conformité Européenne - French for "European Conformity".
CE appears on many other products, from toys to medical devices, and it shows that they meet the EU's safety, health and environmental rules and can move freely across its countries with no additional checks.
But the European Commission has rejected the idea that EU rules stopped the UK from having the crown stamp on glasses as well.
A spokesperson told us: "EU law does not prevent markings from being placed on products, so long as it does not overlap or be confused with the CE mark."
A Eurosceptic, purveyor of racist propaganda rag desperately looking for anything that can validate their stance and distract their readership from realising that they have been duped. 2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired)
29th May 2022 4:53 pm
RRSTDV8
Member Since: 07 Apr 2014
Location: Here
Posts: 13349
nigethecat wrote:
RRSTDV8 wrote:
Global Puffin wrote:
For those of us who work in engineering, regressing to Imperial would be awful.
There are only three countries that use non-metric and of those, the Yanks actually do use metric they just convert it to US Customary system.
And for those that remind us that the UK uses Imperial measurements still in some circumstances, they are all based on the metric equivalent (thanks to the Weights and Measures Act) 1985.
Well I for one know far it is to all my regular destinations in miles, I know how few miles to the gallon my D3 does I know how tall I am in feet and inches, I know how much I weigh in pounds and stones and know the size of my feet in regular sizes … who else falls into this category? I’m not suggesting for a minute we go back to pre-decimal money but some things will not change for me..
And it’s also important as to who holds the glass as well as what’s in it
I'm 51 and was born 6 days after Decimal Day. I use metric and imperial equally happily. I use metric and imperial on site - increasingly I get a funny look if I ask "is that a 6 by 2 up there?", "No, mate, it's a 150x50". Still some older guys about on sites that use imperial but most now are fully metric. I know my weight in imperial and metric (it's too much in both cases!), my height in both, my shoe size in UK and EU systems. I use metric when cooking except where spoon measures are given. I use google to convert cups to metric if following a Yank recipe.Visiting from rrsport.co.uk
2012 RRS SDV6
2008 RRS TDV8
"When you fire that first shot, no matter how right you feel, you have no idea who's going to die! You don't know who's children are going to scream and burn. How many hearts will be broken. How many lives shattered. How much blood will spill, until everybody does what they were always going to have to do from the very beginning: SIT DOWN AND TALK!"
29th May 2022 5:33 pm
RRSTDV8
Member Since: 07 Apr 2014
Location: Here
Posts: 13349
LT wrote:
I am sure that the Mail faithful will lap it up, but it is utter nonsense.
Same with the lie about passport colours, of course. DM and others routinely lie to their readers about such things. Shame there isn't a press watchdog that isn't itself run by the press barons.Visiting from rrsport.co.uk
2012 RRS SDV6
2008 RRS TDV8
"When you fire that first shot, no matter how right you feel, you have no idea who's going to die! You don't know who's children are going to scream and burn. How many hearts will be broken. How many lives shattered. How much blood will spill, until everybody does what they were always going to have to do from the very beginning: SIT DOWN AND TALK!"
29th May 2022 5:36 pm
LT
Member Since: 31 Dec 2005
Location: South West
Posts: 23592
Indeed.
What's even more frightening is the fact that (last time I checked) the DM has the highest circulation inc. online. 2006 D3 HSE (Original & still the best)-GONE
2010 D4 HSE (A bit bling)-GONE
2014 D4 HSE (Almost too bling)-GONE
2015 D4 HSE (A heated what?)-GONE
2016 D4 Landmark (Written Off)-GONE
2016 D4 Landmark (Surely the last!) PD1881 rims-GONE
2017 FFRR SDV8 Autobiography (now semi-retired)
I'm 51 and was born 6 days after Decimal Day. I use metric and imperial equally happily. I use metric and imperial on site - increasingly I get a funny look if I ask "is that a 6 by 2 up there?", "No, mate, it's a 150x50". Still some older guys about on sites that use imperial but most now are fully metric. I know my weight in imperial and metric (it's too much in both cases!), my height in both, my shoe size in UK and EU systems. I use metric when cooking except where spoon measures are given. I use google to convert cups to metric if following a Yank recipe.
Snap, albeit about seven weeks earlier. I was recently quite shocked to find a tape-measure I had purchased only had metric markings. There are times when being able to divide by 2, 3, 4 or 6 is easier than dividing by just 2 or 5. Mind you, I also have a tape-measure marked in 'hands'! Shouldn't it be "No, Sir, it's a 150x50"?
2015 Volvo V40
2014 D4 HSE
2006 RRS - C'est mort. Fin... ...It's alive! Oh no, it's not - scrapped.
2019 Suzuki Kingquad 400
2017 RamRod Taskmaster 1150
1977 John Deere 2130
29th May 2022 6:07 pm
RRSTDV8
Member Since: 07 Apr 2014
Location: Here
Posts: 13349
Gone are the days of "sir" on building sites. Visiting from rrsport.co.uk
2012 RRS SDV6
2008 RRS TDV8
"When you fire that first shot, no matter how right you feel, you have no idea who's going to die! You don't know who's children are going to scream and burn. How many hearts will be broken. How many lives shattered. How much blood will spill, until everybody does what they were always going to have to do from the very beginning: SIT DOWN AND TALK!"
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
29th May 2022 8:45 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72939
Ditto, apart from weight (stones). And altitude.
29th May 2022 8:47 pm
leeds
Member Since: 30 Aug 2010
Location: West Yorkshire
Posts: 4312
Now talking about beer glasses is that a pint to brim glass or an oversize pint glass. There was a serious discussion some years ago wether a pint of beer should include the beer head or not. Can not remember the exact conclusion but the amount of beer head that drinkers like vary around the U.K.
Currently am drinking a 330ml can of local beer from a ‘pint’ glass which does not have a CE mark, nor a Crown mark, nor a pint level mark. The only marking on it is Otter Creek as it is an American beer glass. Putting it bluntly all I am concerned about is the taste and quality of the beer inside the glass.
Cheers, folk as I drink this rather nice Darkland Brewery beer
Brendan
29th May 2022 9:23 pm
RRSTDV8
Member Since: 07 Apr 2014
Location: Here
Posts: 13349
The size of the glass only matters if you're paying for a given amount and using the glass as the measure in a licenced premises. But as you say, the depth of the head on some beers will vary significantly depending on where you are in the UK. As someone that drinks cider, it's not a problem for me - fill to the brim for me, thanks. Visiting from rrsport.co.uk
2012 RRS SDV6
2008 RRS TDV8
"When you fire that first shot, no matter how right you feel, you have no idea who's going to die! You don't know who's children are going to scream and burn. How many hearts will be broken. How many lives shattered. How much blood will spill, until everybody does what they were always going to have to do from the very beginning: SIT DOWN AND TALK!"
29th May 2022 9:49 pm
nigethecat
Member Since: 11 Sep 2016
Location: Marnoch
Posts: 4197
If we are up for decimalising everything then why haven’t we decimalised time? After all is a pretty bad way of structuring the day I mean 24 hours? Whoever thought of that ? And how come the year is 365.25 days long? they tried to hide the fact that they can’t even get that right by throwing in an extra day every four years!
Let’s a keep a year as it is but have 10 months instead of 12.. after all it was the Romans that added in July and August as a matter of vanity.. and I live in Scotland so losing these two months won’t make the slightest difference as the weather will be just the same, cold wet and windy… just maybe slightly warmer
Every month (36.525 days as it currently is) will have 10 weeks thereby giving us 3.65 days per week (or 7 days every two weeks…) so you get 10 weekends per month! every week would equal 73.56 hours Every day would have 10 hours, (or 7.35 of todays hours so two new days would be very close to one current day)reducing the space needed on watches and digital displays… brilliant! And every hour would have 100 minutes and every minute would have 100 seconds would make working out wages childsplay!
A huge benefit would be that we could keep the current speed limits on the roads as 1 hour would be 73.5 minutes of todays time so very similar, interest payments on mortgages would only have to be made 10 times a year rather than 12 and you’d get 1.5 days off after every three days Bargain
So who’s with me? I want to see the sweets before I get into your windowless van... I'm not stupid!
Corris Grey D4 Commercial SE 2016
Zermatt Sliver 2007 D3 SE manual (gone)
Indus Silver D4 HSE 2015 (gone)
Bonatti Grey D3 HSE 2006 (gone)
White D3 S (LHD) 2007 (gone)
Firenze Red D4 HSE 2014 (gone)
Black RRS 3.6TDV8 2008 (gone)
Rusty Green Defender 110 1997 (gone)
Black FL2 HSE 2013 (gone)
29th May 2022 9:57 pm
RRSTDV8
Member Since: 07 Apr 2014
Location: Here
Posts: 13349
Wow, someone has too much time on their hands! Visiting from rrsport.co.uk
2012 RRS SDV6
2008 RRS TDV8
"When you fire that first shot, no matter how right you feel, you have no idea who's going to die! You don't know who's children are going to scream and burn. How many hearts will be broken. How many lives shattered. How much blood will spill, until everybody does what they were always going to have to do from the very beginning: SIT DOWN AND TALK!"
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
I know how tall I am in feet and inches, I know how much I weigh in pounds and stones and know the size of my feet in regular sizes … who else falls into this category? I’m not suggesting for a minute we go back to pre-decimal money but some things will not change for me..
... All LED interiors lights, DRLs, Spare Wheel protector.
