Member Since: 16 Dec 2018
Location: South Wales
Posts: 543
D3 Crossover pipe Manual vs Auto design.
Hi all.
I am wondering if anyone can confirm if there are any design differences between a manual and auto crossover pipe, including the mounts?
Are they interchangeable between the two?
Thank you
Gez.Defender 110 2.4 TDCi Utility Station Wagon.
2007 Disco 3 GS TDV6 Manual
200,000+ mile club 😎
10th Jun 2021 4:52 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13865
Hi
Can only find one part number 1357035, so far can’t see any difference between the auto/ manual but hopefully someone will be along to 100% conform that for u
Plus cheapest I’ve seen is island 4x4 at £360.00
Member Since: 16 Dec 2018
Location: South Wales
Posts: 543
Your a star, thank you Defender 110 2.4 TDCi Utility Station Wagon.
2007 Disco 3 GS TDV6 Manual
200,000+ mile club 😎
10th Jun 2021 6:58 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4891
Same pipe for manual or auto. yµ (idµ - eAµ) ψ=mψ
10th Jun 2021 7:06 pm
G3Z
Member Since: 16 Dec 2018
Location: South Wales
Posts: 543
Does that include the mount fixings also?
Incase I find that mine are missing during the job.Defender 110 2.4 TDCi Utility Station Wagon.
2007 Disco 3 GS TDV6 Manual
200,000+ mile club 😎
10th Jun 2021 7:18 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4891
If my memory serves me correctly they are the same crossover pipe brackets for auto and manual, but I've never had any reason to actually compare them.
Just don't loose them and you'll be fine. yµ (idµ - eAµ) ψ=mψ
10th Jun 2021 7:42 pm
Disco_Mikey
Member Since: 29 May 2007
Location: Dundee, Scotland
Posts: 20786
Member Since: 16 Dec 2018
Location: South Wales
Posts: 543
I was hoping you’d see this thread, Mikey. Thank you all kindly
Are the brackets visible from ontop or the underside that I can climb and have a look, before deciding if I need a bare pipe, or with brackets.
Thanks all Defender 110 2.4 TDCi Utility Station Wagon.
2007 Disco 3 GS TDV6 Manual
200,000+ mile club 😎
10th Jun 2021 8:24 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13865
G3Z wrote:
Your a star, thank you
Ur so welcome , always a team effort
Done some further searching and as mentioned brackets are different , found this which shows there different between the auto and a manual , also part numbers showing u which is which , so as urs is a manual easy to select what brackets u need going from the part numbers below
Hope that helps
Ie
Left Hand Side of Central Hanger - TDV6 Diesel
Manual Gearbox Models
Equivalent to Part No: WCU500180
Last edited by gstuart on 10th Jun 2021 9:11 pm. Edited 2 times in total
10th Jun 2021 8:47 pm
gstuart
Member Since: 21 Oct 2016
Location: kent
Posts: 13865
Also see HT2 , ref studs are different according the vin number , however I see the number is superseded to LR113358 so maybe they all use the same one ???? , but of course one of the other members can also verity that for u
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum