Member Since: 01 Oct 2020
Location: Suceava
Posts: 14
Error p0183 / P0404 Limp Mode and Engine Fault
Hello.
I own a D3 2.7 TDV6. After a few km of drive i have Engine Fault lights up and limp mode . I changed the Egrs, but I still have the EGR error even after deleting the errors. It is possible either limp mode from Fuel Temperature or regulator control?
I have errors:
p0404 exhaust gas recirculation control circuit range/performance
p0183 fuel temperature sensor a circuit high input
p0003 fuel volume regulator control circuit low
Thanks!
1st Oct 2020 8:44 am
ivniulian
Member Since: 01 Oct 2020
Location: Suceava
Posts: 14
I solved it, the plug on the temperature sensor was not placed properly and did not make contact. I solved it with a spray. I found the solution on the forum. Thank you!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum