Stevei0742
Member Since: 20 Sep 2020
Location: North Walsham
Posts: 15
  
|
| New boy needing help with a couple of faults :-) |
|
Hi guys i have just taken delivery of my first D3 it is a56 plate HSE and seems to be in fairly good condition, i do however have a couple of issues if anyone is able to help.
I have a fault code and description
C1A02 Rotary Encoder Stuck In Intermediate Position , cant seem to find much info online ! what is it talking about ? 
Also i cant get low range to select, no error messages on screen and no fault code that i can see for this , any ideas ? Tried in Neutral and in Park handbrake on or off foot brake on or off and no difference.
Regards Steve.
|
 27th Sep 2020 12:30 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10640
 
|
I think that the round knob for different drive surfaces.
Try moving it (with engine running) and see if the lights round the knob change.
It could be because of this fault you can't get into low range
|
| 27th Sep 2020 12:56 pm |
|
|
Stevei0742
Member Since: 20 Sep 2020
Location: North Walsham
Posts: 15
|
Hi yes i think it might be that knob as you say, i only have the far left position illuminated and it doesnt change when i rotate the knob i'll have to see if i can get it out and try cleaning it.
Steve.
|
| 27th Sep 2020 1:51 pm |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10640
|
Engine must be running
clean the Hi Lo and Up down contacts too with IPA while your there
|
| 27th Sep 2020 2:22 pm |
|
|
Stevei0742
Member Since: 20 Sep 2020
Location: North Walsham
Posts: 15
|
Hi all just a quick follow up in case anyone has similar faults and is searching for a answer. I changed the terrain response module with a second hand one and now everything works.
Deep joy.
|
| 5th Oct 2020 9:30 am |
|
|
tgreer
Member Since: 12 Aug 2020
Location: Henley-on-Thames
Posts: 111
|
Do you still have your old one?
|
| 5th Oct 2020 10:01 am |
|
|
Stevei0742
Member Since: 20 Sep 2020
Location: North Walsham
Posts: 15
|
Hi.
Yes i do have the old one.
Steve.
|
| 5th Oct 2020 10:17 am |
|
|
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10640
|
Is that the switch pack you changed?
|
| 5th Oct 2020 12:10 pm |
|
|
tgreer
Member Since: 12 Aug 2020
Location: Henley-on-Thames
Posts: 111
|
Stevei0742 wrote:Hi.
Yes i do have the old one.
Steve.
Can i get it off you? I'm looking to do some electronics debugging on some of the bits there but don't want to wreck the one running my car
|
| 5th Oct 2020 12:36 pm |
|
|
Stevei0742
Member Since: 20 Sep 2020
Location: North Walsham
Posts: 15
|
Well you can have it but it's faulty! The rotary knob is not working!
Steve.
|
| 5th Oct 2020 2:58 pm |
|
|
Stevei0742
Member Since: 20 Sep 2020
Location: North Walsham
Posts: 15
|
Pete K wrote:Is that the switch pack you changed?
Hi yes it is I bought the whole center section with the rotary knob and the two switches from ebay a bit of a fiddle but all good now.
Steve.
|
| 5th Oct 2020 3:00 pm |
|
|
