Member Since: 03 Mar 2019
Location: Tasmania
Posts: 181
2.7 TDV6 - replacement oil pump - front crankshaft oil seal
Anyone able to advise me if a replacement front crankshaft oil seal (1102415) is also required when replacing the engine oil pump (LR076782) on the 2.7 TDV6 engine? Or is the seal included and prefitted to the new oil pump?
27th Nov 2019 2:43 am
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2463
No the seal is seperate and has to be fitted after the pump is installed.
27th Nov 2019 7:15 am
twr7cx
Member Since: 03 Mar 2019
Location: Tasmania
Posts: 181
Cheers for that. Is any special tool required in order to install the new front crankshaft oil seal in place on the oil pump once it’s been fitted?
27th Nov 2019 8:11 am
aja4x4
Member Since: 14 Apr 2019
Location: Westbury
Posts: 2463
There is a tool for making sure the seal is fitted correctly but most people use a socket. The seal has to sit 1mm back from the casing and if it's the new ptfe type needs to be left for 4hours before turning the engine.
27th Nov 2019 8:58 am
twr7cx
Member Since: 03 Mar 2019
Location: Tasmania
Posts: 181
Brilliant, thanks.
27th Nov 2019 9:33 am
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10628
you also need a streach bolt for the crank
27th Nov 2019 1:08 pm
twr7cx
Member Since: 03 Mar 2019
Location: Tasmania
Posts: 181
Thanks. In all the threads and sites I've read so far though nothing has mentioned about the crankshaft nose bolt being a Torque To Yield bolt that needs to be replaced during the timing belt change. Is that part number LR013377 for the new crankshaft nose bolt? Shown as 6A345 in the parts diagram.
What about the 2x 1346539 oil seals? Listed in the parts diagram as 7G281.
If you get the full kit for front and rear belts all the bolts come in the kit, but you need to order the crankshaft seal, and bolt, the bolt is tightened to 100nm, then plus 90 degrees.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum