Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
lronly
Member Since: 01 Nov 2013
Location: Mellieha
Posts: 67
|
Hi all
I have a d3 that has about 1.25inc of free play at the steering wheel.
I checked all the components and the loose is at the steering gear itself.
Is there a way of setting the steering gear similar to the way one can set the steering box on a D2?
thanks
|
3rd Jul 2019 1:59 pm |
|
|
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873
|
No adjustments other than to make it stiffer to turn, I’ve got about 20mm and I’ve changed track rod ends, lower column and the rack also the steering rods on the end of the rack Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
|
3rd Jul 2019 8:29 pm |
|
|
lronly
Member Since: 01 Nov 2013
Location: Mellieha
Posts: 67
|
It cannot be..... if you've changed all this including the rack then you should be fine...… my free play is in the rack itself and I am asking whether there is an adjustment that can be done to the rack like a steering box on a d2 or defender is adjusted?
thanks
Josef
|
4th Jul 2019 1:10 pm |
|
|
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873
|
I know what your asking, I’ve asked the manufacturer of the rack and he says nothing to take up the backlash of the pinion gear Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
|
4th Jul 2019 9:51 pm |
|
|
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 873
|
I’ve just took mine to a steering specialist and he took one look where the lower column meet the input shaft to the rack and said it’s the lower shaft bolt not tight enough so he tightened it up but it stripped
I got a higher tensile bolt and nut to re do it and still no good
I bit the bullet and got another lower shaft genuine as the other was new but britpart
Fitted along with the new bolt 8mmx35mm and washer with a nylock nut just for good measure it’s cured it no more free play Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
|
13th Jul 2019 6:54 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.