Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 871
Timing belt kit question
Doing this the weekend along with oil pump and water pump, I’ve had all my shiny new box of goodies come and as I’ve checked the two idler pullys are different to look at but say the same codes and the dims are the same except for the rear of the black pull being slightly larger than the blue
Has anyone else had this as both came in exactly the same boxes and labels
Appreciate your comments on this [/u]Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
They have also changed the bolt size , they used to be 13mm, now they come with 15 mm bolts.
Flack
18th Apr 2019 8:33 pm
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 871
Thanks flack exactly where they came from Metal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
18th Apr 2019 8:40 pm
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 871
So got done today on this done oil pump change and it was needed with new updated pump, new coolant pump, tensioner. Idlers and belt and the rear fuel pump belt and tensioner
10 half hours loved itMetal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
Well done Am I Gammon or Woke ? - I neither know nor care.
2016 Discovery 4 Landmark
2011 Mercedes Benz SL350 (R230)
1973 MG B GT V8 - 3.9L John Eales engine, 5 speed R380 gearbox, since 1975.
1959 MGA roadster - 1.9L Peter Burgess Engine - 5 speed gearbox
Past LRs - Multiple FFRs, Discos & a Series I - some petrol, some diesel,
none Electric or H2 fuel cell - yet.
There are 10 types of people in this world: Those who understand binary, and those who don’t.
20th Apr 2019 9:39 pm
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 871
Thanks NJSS, doing a flush tomorrow on the gearbox and anything else that needs looking atMetal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
20th Apr 2019 10:32 pm
Briscoe05
Member Since: 25 Mar 2019
Location: Lincoln
Posts: 67
Dazz360 wrote:
So got done today on this done oil pump change and it was needed with new updated pump, new coolant pump, tensioner. Idlers and belt and the rear fuel pump belt and tensioner
10 half hours loved it
How did you get access to the rear belt?
How are you flushing the gearbox oil? as I think I could do with mine being done
21st Apr 2019 6:05 am
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 871
Hi brisco I removed battery and the tray, unclipped the low pressure fuel pipes (1 yellow clip and 1 grey clip), egr metal coolant pipe that crosses the engine towards the back and then released the 3-4 harness plugs pushing the wires over out the way. Loads of threads on here how to do it. It’s not a timed belt either
I’ve made a set up with a pump to swop fluids in the gearbox so will se how it goes todayMetal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
21st Apr 2019 9:04 am
Briscoe05
Member Since: 25 Mar 2019
Location: Lincoln
Posts: 67
Quote:
Hi brisco I removed battery and the tray, unclipped the low pressure fuel pipes (1 yellow clip and 1 grey clip), egr metal coolant pipe that crosses the engine towards the back and then released the 3-4 harness plugs pushing the wires over out the way
Nice landrover go over the top and do it reverse with a mirror (my dad has his done) was just wondering might tackle it myself when mines due sounds straight forward enough.
21st Apr 2019 10:00 am
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 871
Moving the battery out and the looms allows more room to go over the top and down the back.
If you have big hands i guess it would be a lot harder
Plenty of knowledgeable guys on here to help with guides too
https://www.disco3.co.uk/forum/tdv6-timing...belt+guideMetal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
21st Apr 2019 1:32 pm
Briscoe05
Member Since: 25 Mar 2019
Location: Lincoln
Posts: 67
Let me know how gearbox flush goes?
21st Apr 2019 4:16 pm
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 871
I changed the auto sump for a metal and drained what I could then done the process of filling and checking I’m leaving it for now give it 5-6 months then do a flushMetal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
22nd Apr 2019 1:14 pm
Briscoe05
Member Since: 25 Mar 2019
Location: Lincoln
Posts: 67
Was it easy enough to change? Feeling mine needs doing as I sometimes get a little bounce in the revs when cruising not all the time though.
Seems characteristic of the auto gearbox fluid needing doing.
22nd Apr 2019 1:37 pm
Dazz360
Member Since: 03 Sep 2016
Location: West Mids Walsall
Posts: 871
I didn’t remove the cross member so it was a bit awkward to get the fixings at the front I drained the sump and took the easy bolts out then used a spanner with a t-40 to get the rest
All read this from threads on here
Changing the fluid will help you a bit but not fix the underlying issueMetal auto sump & fluid change (3 hrs)
LR door puddle projectors (10 mins)
Tinted Bonnet wind deflector (10 mins)
All Intercooler pipes and Tbolts (2hrs)
3 injectors replaced so far (30mins)
Sunroof drain pipes both sides 2.5 hrs)
Rear discs, shoes,pads,callipers,flexi hoses, rigid brake line, n/s upper hub carrier bush and rear n/s upper arm (13hrs over 2 days)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum