M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8225
  
|
Does anyone know the procedure for setting up navigation voice tags on a D4 HSE? My old D3 came with a separate booklet on how to set them up and allocate them to a route, the D4 manual is very vague to say the least. I can save a route and can save a voice tag but can’t get them to marry.
I found them very useful and easy to use on the D3 with a simple verbal command “ navigation, go to xxxx)”, it worked every time for me. It can when others can't,
It will when others won't,
It goes where others don't.
|
 14th Mar 2019 7:25 am |
|
|
M3DPO
Member Since: 22 Sep 2010
Location: Notts.
Posts: 8225
|
As it seems no one knows so after hours of trying I will tell everyone the only way I have found to do it, it appears you have to be at the location you want to make a navigation voice tag (with the D3 it can be done from anywhere), from the satnav set up screen(hard button)>voice tags>navigation give the place you are parked at any name that is relevant and easy to remember and press store.
Next time you want to go to that place which can be from anywhere simply press the voice button and say; “Navigation go to [name]”, this can be done while you are travelling, It’s very useful for finding your way to a destination from areas you don’t travel often, on holiday for instance, home or abroad.
The same principle can be done with phone calls, just change “navigation” to “phone”, the phone can be set up anywhere 
This is for a 2014 facelift model. It can when others can't,
It will when others won't,
It goes where others don't.
|
| 15th Mar 2019 2:45 pm |
|
|
