Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate ·
Log In
|
- You are currently viewing DISCO3.CO.UK as a guest - Register to take part or Log In
paulmeryan
Member Since: 15 Aug 2011
Location: Glasgow
Posts: 742
|
Checking which bolts are needed for front lower arms |
|
My D3 is having both its lower front arms replaced with new items this Wednesday.
Should I buy 2 of these from AF or is it sufficient to just buy two outer bolts and wishbone bolts?
https://www.advancedfactors.co.uk/afb05-di...4038-p.asp
They were done about 5 or 6 years ago but I can't remember what I bought at the time, so I probably got a full kit last time. I just bought some arms from another forum member without bolts and want to make sure before it goes to the garage. VR6 > 330D Touring > D3 HSE > !?XC90?!
|
16th Dec 2018 2:48 pm |
|
|
LR3norway
Member Since: 25 Dec 2016
Location: NORWAY
Posts: 196
|
The long bolt through the airstrut normally don't seize. Put nothing wrong with having a full kit.
I was not happy with the quality on the bolts from AF. Think it was bearmach? Bad quality on the exentric washer. Also read about someone pulling the treads on them, with the right torque applied.
Would buy LR bolts.
|
16th Dec 2018 3:27 pm |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13015
|
I think the kit is everything for both sides … but I too have had an issue with quality. considering putting one of the old bolts back in … already swapped the new washers back to the old ones.
|
16th Dec 2018 5:06 pm |
|
|
johnlad
Member Since: 02 Dec 2016
Location: blackpool
Posts: 408
|
I bought the meyle arms from AF recently with the bolts, nothing wrong with the bolts supplied to me.
|
16th Dec 2018 10:46 pm |
|
|
paulmeryan
Member Since: 15 Aug 2011
Location: Glasgow
Posts: 742
|
It seems those with issues bought bolt kits separately.
I'll give the Eurospares bolts from island-4x4 a swerve too then, given the feedback on pattern parts. They're half the price of AF ones . Whatever the make though, prices for these 3 bolts + associated nuts and washers are nuts.
As the car's going in to the garage first thing on Wednesday, it looks like I'll need to get them direct from LR, assuming Taggarts have them in stock.
@Hardware17 what were the problems that lead you to swap the washers already and consider putting your old bolts back on? VR6 > 330D Touring > D3 HSE > !?XC90?!
|
16th Dec 2018 11:22 pm |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13015
|
Flimsy lugs in the loose washers and welded washer coming loose on one bolt.
http://disco4.com/forum/post2003235.html#2003235 .
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
|
17th Dec 2018 7:28 am |
|
|
reb78
Member Since: 21 Apr 2018
Location: Herts
Posts: 222
|
paulmeryan wrote:
I'll give the Eurospares bolts from island-4x4 a swerve too then
Best to give Island 4x4 a swerve - dreadful customer service and communication is non existent. Anyone who’s had an issue with a part from them and tried to get aftersales service will probably know what I mean!
|
17th Dec 2018 8:39 am |
|
|
paulmeryan
Member Since: 15 Aug 2011
Location: Glasgow
Posts: 742
|
Cheers for all comments.
@Hardware17 I saw that post a while ago. In it Jubbly says the four new bolts and nuts can be had from LR for £35. Taggarts quoted me £117 for the parts in the AF bolt kit excl. hub nuts.
Do you or anyone know what part numbers or items he means? The AF photo makes no sense, it shows more nuts than itemised. I expect the hub nut isn't really needed, especially as I had both front hubs replaced this year.
If I can get the essentials needed from this lot direct from LR for about £35 as Jubbly says I'll go with that as doubt I'll get them shipped by tomorrow now.
Anyone able to cross out what I don't really need below?
RDI000034 Bolt x 2
RYF000203 Washer x 2
CDU1534L Hub Nut x 1
FX116056 Nut x 3
WA116106 Washer x 2
RYG000440 Bolt x 1 VR6 > 330D Touring > D3 HSE > !?XC90?!
|
17th Dec 2018 9:43 am |
|
|
Hardware
Member Since: 28 Jun 2016
Location: Hiding under the M60
Posts: 13015
|
Speak to Dan @ Duckworths... knows his stuff. .
Dean
====================================
2011 D4 XS - OBD port protection, RLD spare wheel protector, All LED interiors lights, Timed Climate enabled, iiD tool paired.
2011 D4 Landmark - Stolen from same dealer before I paid for it
2011 D4 GS - Stolen whilst at dealer ... All LED interiors lights, DRLs, Spare Wheel protector.
1996 300Tdi - Eaten by tin worms
|
17th Dec 2018 1:54 pm |
|
|
paulmeryan
Member Since: 15 Aug 2011
Location: Glasgow
Posts: 742
|
Good idea. Should have thought of that.
Thanks. VR6 > 330D Touring > D3 HSE > !?XC90?!
|
17th Dec 2018 2:35 pm |
|
|
|
Posting Rules
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
|
|
DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
|
|
DISCO3.CO.UK is independent and not affiliated to Land Rover.