Been working fine, csnebackbto the car parked at a garage to find when i put in reverse long beep do i checked the bumper no noticable damage, plugged iid in no fault codes but on live date bothe rear left ines are showing .5 so they think something is very close? They look clean any ideasRange Rover Westminster 4.4 TDV8 what a car
Discovery 3 HSE 2006 gone but never forgotten
Member of the 234,567 mile club😎
21st Apr 2018 8:44 pm
pjm-84
Member Since: 04 Oct 2016
Location: Hampshire
Posts: 2514
Had something similar recently. 0.5 reading so I changed it out.
Did yhat fix ghe problem im suprised both are playjng upRange Rover Westminster 4.4 TDV8 what a car
Discovery 3 HSE 2006 gone but never forgotten
Member of the 234,567 mile club😎
21st Apr 2018 9:14 pm
pjm-84
Member Since: 04 Oct 2016
Location: Hampshire
Posts: 2514
Yep. Only had one showing 0.5 and the constant beep. Fixed the problem.
21st Apr 2018 9:15 pm
icestationzebra
Member Since: 05 Nov 2008
Location: Cheshire
Posts: 593
Pjm-84.
Can I ask if you bought replacements from a dealer or if it was ebay? If ebay would you be willing to post a link to the supplier please?.
Thanks.
22nd Apr 2018 12:15 pm
pjm-84
Member Since: 04 Oct 2016
Location: Hampshire
Posts: 2514
Bought 2 rear (one broken on removal) and 1 front inner in 2016 to get the PDC working again. And a further two rear in 2018 (one as a spare ) after another rear failed (not a recently changed one).
I can change them without taking the bumper off. But the moral of the story should have been at that price to change all 4 on the rear. Access to the front is a lot easier.
22nd Apr 2018 2:05 pm
G7jtk
Member Since: 03 Jun 2014
Location: Prudhoe
Posts: 854
Ill have to look into this. Do they come in colours? (Buckingham Blue)
22nd Apr 2018 8:36 pm
pjm-84
Member Since: 04 Oct 2016
Location: Hampshire
Posts: 2514
Nope.
Front inner was a prime and spray. Very easy DIY
22nd Apr 2018 11:11 pm
icestationzebra
Member Since: 05 Nov 2008
Location: Cheshire
Posts: 593
Thanks pjm-84 for the help and reply.
23rd Apr 2018 2:30 pm
G7jtk
Member Since: 03 Jun 2014
Location: Prudhoe
Posts: 854
pjm-84 wrote:
Nope.
Front inner was a prime and spray. Very easy DIY
23rd Apr 2018 5:13 pm
G7jtk
Member Since: 03 Jun 2014
Location: Prudhoe
Posts: 854
Took the plunge and removed the bumper, as usual bugged probkem were the screws hildung the mud flaps on I have now replaced with self tapping bolt head ones so removal will be easier, I found it dead easy to remove the bumper on my own all I would say is once all clips are removed detach from drivers side then from passenger rest the bumper on the sub bumper and remove harness.
Once I got it on the bench I removed the full harness cleaned and checked for ant damage then removed bed the offending sensors put everything back together and re fitted bumper now all are working as they should be next job electric winder for spare wheelRange Rover Westminster 4.4 TDV8 what a car
Discovery 3 HSE 2006 gone but never forgotten
Member of the 234,567 mile club😎
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
