Azzybee
Member Since: 04 Jul 2016
Location: UK
Posts: 287
|
Hi.
Want to get all my rear bushes replaced as over a year ago dealers told me to get them replaced.
Question is do I get the bushes replaced or the whole arms? Am I right to say there are 4 arms in total (2 rear upper and 2 rear lower)?
Changing the bushes only seems a lot cheaper (but also hard work). How bad can the arms get or are they that strong that just changing the bushes will do?
Lastly if advised to get the whole arms replaced where would be the cheapest place to get genuine arms? Discovery 3 HSE 2007
|
23rd Sep 2017 1:15 am |
|
|
Tripe
Member Since: 28 Jun 2015
Location: Tasmania
Posts: 285
|
If you have access to a 10t press and heaps of time, buy the bushes.
If you don't have access to a 10 t press, buy the arms.
I replaced the top rear bushes earlier this year, it took about 2 hours to do both arms,
But I was lucky enough to have acces to sockets that perfectly pushed the bushes out.
If I did them again, I would purchase new arms with the bushes already installed.
|
23rd Sep 2017 3:03 am |
|
|
L319
Member Since: 14 Dec 2013
Location: Herefordshire
Posts: 2081
|
Sponsors ,Advanced Factors for Arms & ADVLRF Discount code 5% or 10% at moment
|
23rd Sep 2017 8:40 am |
|
|
Azzybee
Member Since: 04 Jul 2016
Location: UK
Posts: 287
|
Ok so then I’ll go for replacing them all. So are there 4 arms in total and for a 2007 disco 3 hse are there any particular arms I have to get?
Thanks again. Discovery 3 HSE 2007
|
23rd Sep 2017 12:28 pm |
|
|
Tripe
Member Since: 28 Jun 2015
Location: Tasmania
Posts: 285
|
You should consider changing the knuckle joints as well if they haven't been done in 10 years.
|
23rd Sep 2017 12:54 pm |
|
|