Member Since: 11 Jan 2010
Location: NW Highlands
Posts: 5098
Rear Upper Arm Bolt - should I be concerned?
The 'cam' bolt for the rear upper arm meeting the knuckle was not solid (the 'disc' was slightly loose on the bolt) unlike both the originals and the other replacement bolt (both new bolts were the Borg & Beck set from AF).
I'm assuming the bolt when nipped up should be OK, but should there be any concern about it?Black 05 TDV6 HSE Auto
Grey 05 TDV6 HSE Auto (Gone)
54 TDV6 SE Man (killed by me )
31st Aug 2017 8:44 am
highlands
Member Since: 11 Jan 2010
Location: NW Highlands
Posts: 5098
Black 05 TDV6 HSE Auto
Grey 05 TDV6 HSE Auto (Gone)
54 TDV6 SE Man (killed by me )
31st Aug 2017 8:46 am
Biffysun
Member Since: 09 Jul 2011
Location: Central
Posts: 1788
every one I've had has been one piece, maybe this is something new but I'd query it too
31st Aug 2017 9:14 am
SpiderBaby D3 Decade
Member Since: 21 Sep 2007
Location: Liverpool
Posts: 1407
Is that a new bolt?
The ones I had in my kit were one piece as were the ones I took out - best to check on that.I see no ships........
31st Aug 2017 11:46 am
highlands
Member Since: 11 Jan 2010
Location: NW Highlands
Posts: 5098
Yep, new bolt.
Annoying thing is I'm getting a full alignment done today so don't really want to be swapping it later.
Could use the old one but not sure if they are, somewhat, stretch bolts. That and I mullered the old bolt's 8mm end somewhat.
Didn't notice that it wasn't one piece until after I'd slathered it in copper grease, hence it looks a bit messy in the photo.Black 05 TDV6 HSE Auto
Grey 05 TDV6 HSE Auto (Gone)
54 TDV6 SE Man (killed by me )
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum