Duffer
Member Since: 30 Jun 2013
Location: Pembridge
Posts: 44
|
After a years of trusty service my FBH doesn't want to play ball this Autumn.
Can anyone point me in the direction of a rebuild kit - not just gaskets but the glow plug etc.
Also any tips on getting the large electrical plug (thick purple and black) of the unit. I have tried and failed!
Cheers
Duffer SWB S111 V8
LWB S111 2 1/4
You're never late with a V8!
|
25th Oct 2016 9:52 am |
|
|
Discogaz
Member Since: 17 Mar 2014
Location: Bracknell
Posts: 1399
|
Are you absolutely sure you haven't run the car low on fuel (less than a quarter tank) as the FBH will make , I think, three attempts to fire and if it gets the low fuel message each time, it locks out and needs a re-set with a Nanocom or IID tool.
Mine did this last year and have also had a few local D3's needing a reset which I managed with my Nanocom.
All was well after.
|
25th Oct 2016 10:55 am |
|
|
|
Duffer
Member Since: 30 Jun 2013
Location: Pembridge
Posts: 44
|
Is there any way I can tell if it needs resetting?
Yes, read the guide but I can't the plug (purple and black) off mentioned in my original post.
D SWB S111 V8
LWB S111 2 1/4
You're never late with a V8!
|
25th Oct 2016 11:08 am |
|
|
blue meanie
D3 Decade
Member Since: 04 Aug 2005
Location: Newbury
Posts: 6861
|
ah ok, ISTR mine needed a fair bit of welly when I did mine in fact I'm not sure that I didn't actually bust the retaining part when I did it. and theeeeennn......???
|
25th Oct 2016 11:28 am |
|
|
Martin
Site Admin and Owner
Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18526
|
Use the Disco's key blade to operate the latch on the connector. 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!
|
25th Oct 2016 12:01 pm |
|
|