2012 LR4. Want the option to lay just the third or possibly the second and third row seats down and basically use the space as a pickup bed to haul kayaks with the car being protected. I want protection up the sides as well. Having a hard time finding anything like this online. Any ideas?
22nd Jan 2016 3:25 am
Fitzy73
Member Since: 09 Feb 2014
Location: Truro
Posts: 2407
There is the following from Land Rover, but not sure how much help it would be when the middle seats are folded.
Member Since: 01 Oct 2015
Location: Edinburgh
Posts: 907
I have the same need! I'm thinking of getting a local tarpaulinier to make me what is in effect a four sided box made out of tarpaulin material that will slide into the cargo area when all seats are down. Height of sides will be about a metre I guess, a flap that extends over the lower tailgate and a few other enhancements I can think of. One company I spoke to briefly said that will be about £80 but that seems optimistic to me. That's as far as I've got so far....
I did look online for what I want, but all the ready made solutions are not quite what I want. There are some online who say they will customise their load space covers / hatch bags / floor protectors but I'm veering towards a local company right now.
I'll watch this thread with interest and will post any progress I make.D1 300Tdi - gone
D2 Td5 ES (Alive remapped...mmm) - sadly gone
D4 2012 SDV6 XS - Stolen
D4 2014 SDV6 HSE - Shiny
I've thought of the exact same thing but for doing rubbish tip runs in. I was thinking along the lines of a polystyrene frame (the polystyrene that we use as inner wall insulation in house builds) so 3 sides and a base. Covering it with an old bed sheet and applying glass fibre resin to harden it, a bit like they do to build sub woofer boxes and speaker moulds for in car entertainment. The only thing is it wouldn't be collapsible so storage would be a bit difficult.
22nd Jan 2016 2:31 pm
LiftedDisco
Member Since: 10 Jun 2010
Location: Towcester
Posts: 999
I use a large sheet of PVC - it's 900g/m2 which is the same that they use for curtain-sided trucks.
Cost price should be around £7-8 / m2 and it's possible to hold air weld it using a heat gun and a roller if you want to get all technical and create corners etc.
It's virtually indestructible and folds down when not required - you can also have tabs on the 'sides' if you want to fasten the sides up in any way.D4 Commercial - 65 Plate, 2016MY
D5 Commercial - Handed back when I left that job…
D4 Commercial (2014MY) - gone
D4 Commercial SDV6 - Baltic Blue (also gone)
D1 300TDi... 2" lift, HD bumpers (both), detachable tow hitch, 9,500lb winch, 235/85/16 muds and plenty of other toys (gone to make way for the next toy...)
Smiles per Mile - Tornado Motorsports caged Evo 3... 100" Defender look-alike, with Range Rover running gear - all fully IVA'd and registered!
22nd Jan 2016 10:45 pm
Russell
Member Since: 24 Aug 2007
Location: Kent
Posts: 10564
Hatchbag, they do one that covers the whole area even with the seat folded downMY17 D5 1st Edition Namib Orange
MY15 D4 HSE Kaikoura Stone
MY12 D4 HSE Nara Bronze Sold and gone
MY11 D4 HSE Stornaway Grey Sold and gone
D3 S spec Silver Sold and gone
Tow bar, full length roof bars, side steps, tow bar storage unit, surround camers.
D4 camera club
22nd Jan 2016 11:46 pm
D4mation
Member Since: 29 Jul 2011
Location: Ruralshire
Posts: 593
+1
with the Hatchbag rubber mat on top.MY12 D4 HSE Ipanema Sand
23rd Jan 2016 1:04 am
SN
Member Since: 03 Jan 2006
Location: Romiley
Posts: 13710
Butyl pondliner does the job tooSteve N | 21MY Defender | 08MY Discovery 3 (history) | 06MY Discovery 3 (ancient history)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum