Member Since: 17 Feb 2013
Location: Antwerp
Posts: 19
Bought a set of 20" FFRR Supercharged wheels today and fitted them. But the front caliper touches the wheel?! Any suggestions? I've seen this combination on photos, so it should be possible?
Thanks
10th Mar 2013 8:49 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72921
Do you have a pic of one?
10th Mar 2013 8:58 pm
RRD
Member Since: 17 Feb 2013
Location: Antwerp
Posts: 19
They're the same as these:
[/img]
10th Mar 2013 9:00 pm
T.8ATH
Member Since: 22 Mar 2011
Location: Nottingham
Posts: 158
Have bought some RRS style 3 alloys, I have put a picture in my gallery. These are 20x9.5J. I am yet to buy tyres as I am still not sure on size. I would like to go for 295/45 but there was a chassis modification I believe in 2007 that means these may rub. My car was first registered in March 2007.
Does anyone know please at what point the chassis mod was done and if it will affect my car?
Thanks
Tim
13th Mar 2013 7:17 pm
simon645
Member Since: 22 Feb 2012
Location: cumbria
Posts: 141
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10330
wheels will go straight on, but the add doesnt give the tyre spec, so maybe RRS spec, so not weight rated high enough - contact the seller and ask for the tyre spec
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
15th Mar 2013 11:57 am
simon645
Member Since: 22 Feb 2012
Location: cumbria
Posts: 141
al cope wrote:
wheels will go straight on, but the add doesnt give the tyre spec, so maybe RRS spec, so not weight rated high enough - contact the seller and ask for the tyre spec
Al
Thanks very much Al will contact seller. thanks again
15th Mar 2013 1:55 pm
simon645
Member Since: 22 Feb 2012
Location: cumbria
Posts: 141
AL,
He says tyres are Pirelli Scorpion 245/45/20......what you think please.
cheers simon
15th Mar 2013 2:07 pm
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10330
are you sure he said 245/45x20, and not 275/45x20. If they are 275/45x20's, then these are fine size wise, but he hasnt given you the weight rating. Most 275/45x20 are rated at 110, which is just below the D3 spec at 111, but 110's are being run by quite a few folks and are fine.
Get the weight rating as well.
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
15th Mar 2013 5:09 pm
redjelly5000
Member Since: 18 Jul 2008
Location: Rugby
Posts: 473
guymarks wrote:
armaita wrote:
ronp wrote:
These new 19" FFRR wheels will fit
[as spotted by CFB]
bought these after seeing them here but front ones dont fit, they are rubbing on the calippers. what spacers do i ned to fit and do i fit them on the front only?
Sorry if I'm being thick but I can't find a reply to this question... does anyone know if they can be made to fit? I've been offered some at a good price but need to know I could fit them to my D3
I also bought a set of these after seeing the post on page 7 that says they will fit and as the guys above, they catch on the caliper on my MY05 D3. Did anyone ever manage to fit these and if so could you advise which size spacers you used, and where you got them from? Many thanks.D3 TDV6 HSE 2008 Buckingham Blue (current)
D3 TDV6 HSE 2009 Zermatt Silver (previous)
D3 TDV6 HSE 2005 Maya Gold (previous)
D2 TD5 ES 1999 (previous)
Defender TD5 swb hard top 2005 (previous)
Defender 300tdi swb hard top 1994 (previous)
27th Mar 2013 7:14 pm
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10330
I seem to recall it only a 3mm spacer thats needed. Just try Halfrauds for a universal 5 bolt spacer.
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
28th Mar 2013 12:48 pm
redjelly5000
Member Since: 18 Jul 2008
Location: Rugby
Posts: 473
Thanks Al. I went in last night and plumped for a 5mm in the absence of knowledge but I think you are right as the 5mm gives more than enough space, plus I can only get 7 full turns on the wheel nut, compared to the usual 10. The spacers actually state a minimum of 9 full turns so I bet if I change down to a 3mm as you suggest then I'll get the 9 turns required. Thanks again D3 TDV6 HSE 2008 Buckingham Blue (current)
D3 TDV6 HSE 2009 Zermatt Silver (previous)
D3 TDV6 HSE 2005 Maya Gold (previous)
D2 TD5 ES 1999 (previous)
Defender TD5 swb hard top 2005 (previous)
Defender 300tdi swb hard top 1994 (previous)
28th Mar 2013 1:12 pm
3disco
Member Since: 23 Sep 2010
Location: devon chardstock
Posts: 504
I have just tried to fit rangerover westminster wheels to my brother in laws disco3 and the spokes foul the caliper,does any one know what size spacers would be required,they are the wheels pictured in the first post on this thread and thought it meant they would go straight on,hopefully not bent them as I thought the tightness going on was caused by excess paint on the spigot!
19th Apr 2013 9:52 pm
3disco
Member Since: 23 Sep 2010
Location: devon chardstock
Posts: 504
3disco wrote:
I have just tried to fit rangerover westminster wheels to my brother in laws disco3 and the spokes foul the caliper,does any one know what size spacers would be required,they are the wheels pictured in the first post on this thread and thought it meant they would go straight on,hopefully not bent them as I thought the tightness going on was caused by excess paint on the spigot!
I have found out by trial and error that the westminster wheels need 5mm spacers to clear the caliper on a 56 plate disco se,is it possible to get longer studs for the front hub,thanks in advance.
21st Apr 2013 10:53 pm
3disco
Member Since: 23 Sep 2010
Location: devon chardstock
Posts: 504
3disco wrote:
3disco wrote:
I have just tried to fit rangerover westminster wheels to my brother in laws disco3 and the spokes foul the caliper,does any one know what size spacers would be required,they are the wheels pictured in the first post on this thread and thought it meant they would go straight on,hopefully not bent them as I thought the tightness going on was caused by excess paint on the spigot!
I have found out by trial and error that the westminster wheels need 5mm spacers to clear the caliper on a 56 plate disco se,is it possible to get longer studs for the front hub,thanks in advance.
Further to the last two posts I have just been onto the company that supplied the westminster wheels and they said that the wheels should be centered/supported by the centre of the hub which by fitting the 5mm spacers they are not, so maybe this wheel should be put into the section for wheels that will not fit,looks like an expensive lesson!
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
[/img]
and as the guys above, they catch on the caliper on my MY05 D3. Did anyone ever manage to fit these and if so could you advise which size spacers you used, and where you got them from? Many thanks.
