Member Since: 01 Oct 2008
Location: in the middle
Posts: 557
D3Chris, nice wheels
Ok, it's always been an issue that the D3 must have a tyre load index of 111 or greater, but i have noticed a few people are going for the the 275/45/20's with a load index of 110, so is anyone having any problems with this load index?
Has anyone notified their insurance etc?
And how many people are actually using this spec??
Just curious as it would be my first choice of size over the 285/50/20 116s as it is closer to the original size.
Lee
Last edited by lee157 on 18th Oct 2010 2:07 pm. Edited 1 time in total
18th Oct 2010 11:40 am
al cope
Member Since: 08 Nov 2005
Location: Oldbury, WM
Posts: 10331
I only ran 274/45x20's Nexens rated at 110 for about a month, as they were crap tyres anyway. The 265/50x20's I've got on now are rated at 111W, and I've done almost 32k miles on them so far
AlVolvo XC90 B5 Plus Dark
Gone - MY18 D5 HSE - Corris on 22's with Black Pack
Now gone - MY16 D4 SE Tech, Loire Blue, Almond Leather, Privacy, plus some other goodies.
Old - MY12 D4 SDV6 XS Auto - Ipanema Sand with Almond Leather - Plus other niceties, and D4.com sticker
Older - D3 TDV6 XS Auto - Lugano Teal with Almond Leather, 20" Stormers, Shiny Tailpipes, DVD/TV - and obligatory D3 sticker
Ancient - D3 TDV6 S - Tonga with Ebony, 20" Stormers, satnav & DVD
From my limited understanding, the 110 part refers to the load rating, 110 being 1060kg as oppose to the recommended 111 which would be 1090kg. With the standard D3 rims only rated at 940kg, I would assume that a tyre rated at 1060kg should be more than sufficient.
The S refers to the speed rating which is 112mph as oppose to the recommended H or V being 130mph or 149mph respectively. I don't regularly exceed 100, sorry 70mph in mine so not too worried about the lower speed rating!
Anyone with a bit more tyre knowledge wish to correct me??!!
19th Oct 2010 9:28 am
pepper
Member Since: 06 Jul 2010
Location: Warsaw
Posts: 7
D4 MT dilema
There is an updated tire size chart for the D3 at Johnsonrods web page:
what strucks me, is that some of the sizes claimed to be possible (with lift kit) are nowhere commented and/or tried by anyone on the forum. I have a problem finding a good off-road tire for the D4. As I want to switch back/forth between intended use, I was thinking of going slightly overboard on the size, say 285/55-20. (it is a pity that the only way to get a decent offroad tire on a 3.0l D4 you have to go up in size of the wheel)
Big question is: would it realy ever have a chance to fit a D4?
And than again, unless I am missing something, there is no MT tire in the 285/55 -20 size or any other 20". The closest is the new Nitto Trail Grappler - but that is even bigger (295/55-20).
Last time I went offroading on factory 19" D4 setup, I damaged 2 rims in mud ruts. That hurt This is bound to happen every time as long as the sidewall is short (as it is) and the rim is not recessed (as it is not).
There has to be some solution, and I am still searching. Maybe I will forget MT, )although I mostly need for mud applicatons) and go for LTZ's which look good and get good recommendations from members of this forum.
6th Nov 2010 7:20 pm
basilpeetz
Member Since: 16 Mar 2010
Location: Johannesburg
Posts: 24
The first post on this thread makes reference to the standard 235/65/17 tyres for the S model as per the manual. I am looking at replacing this size with the BF Goodrich Rugged Trail 265/65/17. Any advice on the pro and cons of this change will be appreciated. Thanks.
18th Nov 2010 9:41 am
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72922
It says NOT 235/65/17s, those are RRS sized and wrt most road tyres they are under weight rated.
running Pirelli Scorpion 255/50/20's (109 rating) on a 56 plate D3 on D4 20" 10 spokes.
Used them over summer and swapping back to 18s next week for remainder of winter. Used the D3 6 up with roofbox and boot full to the brim to Lake Garda and back and no problems with loading.
As expected, they fit just fine, and I think they look the mutts on this colour D4 too
Taken on my phone so picture quality not great.
Click image to enlarge
We even got them dirty
The surest sign that intelligent life exists elsewhere in the universe is that none of it has tried to contact us yet.
5th Jan 2011 2:55 pm
POINTYED
Member Since: 22 Mar 2008
Location: BURY,LANCS
Posts: 2758
Hi yeah they look top. I got them on my d3
Please excuse me for saying though, whoever balanced them wants shooting putting grab weights on the outside edge
Get em re balanced properly with stick on weights
They will look much better then.thats just my opinion though sorry
Dunc life is tooooo short.enjoy the moment.dont worry be happy
club BSS
5th Jan 2011 3:11 pm
Ken
Member Since: 20 Feb 2006
Location: Here
Posts: 10865
Pointy shows what you know least amount of weight used when you put the weight out wards
Clips are used because they were used before
looking nice on a set of off road rims aint an option
Stickies fail repeatedly on pitted internals and when applied in cold temps
My advice look before you leap
5th Jan 2011 3:27 pm
POINTYED
Member Since: 22 Mar 2008
Location: BURY,LANCS
Posts: 2758
Point taken ken
That's why I make teeth and not fit tyres
Dunc life is tooooo short.enjoy the moment.dont worry be happy
club BSS
5th Jan 2011 4:07 pm
Ken
Member Since: 20 Feb 2006
Location: Here
Posts: 10865
clearly all your teeth are pretty then
5th Jan 2011 4:10 pm
Rhys9317
Member Since: 24 Apr 2008
Location: Anglesey
Posts: 62
Can anyone tell me if the D4 XS 19" 7 spoke alloys will fit a 2006 '55plate D3 - without modification ?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
Thanks.
least amount of weight used when you put the weight out wards
