Member Since: 23 Jul 2020
Location: Herefordshire
Posts: 8
New dual mass question
Hi all, doing the clutch on my tdv6 2.7,ive not done a clutch or dual mass before so, 2 questions, does the flywheel have a specific orientation, ie when the bolt holes line up its done?
also clutch plate, which way does the shaft go? Long section towards box or engine. Sadly I didn't look when I removed it!
6th Aug 2020 6:24 pm
PROFSR G
Member Since: 06 Mar 2017
Location: Lost
Posts: 4996
Yes the orientation does matter otherwise the locking tool will not locate and you will have to realign it again! Use new bolts as well or there is a high risk of them snapping.
The disc should be mounted so that the raised section of the centre spring damper faces the gearbox/pressure plate. The raised centre "Boss" side faces the flywheel.
If you are still in doubt I'll try find a pic for you tomorrow. yµ (idµ - eAµ) ψ=mψ
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum