Member Since: 28 Mar 2015
Location: Ballymena
Posts: 8
Faults
Hi
Wandering if anyone can help.
I have an 07 disco 3. Wasn't using it so I parked it up in the shed. It has sat in there for about 5 weeks and went to start it the other day but when I turn the key all the lights on the dash come on but it won't turn over. Just brings up loads of faults on the dash and an F where it tells you what gear you are in when in manual. Temp gauge also goes right up and and brings on the light at the top of it. Suspension has also dropped right down as well. I put a new battery in but didn't make any difference. I can't even get it out of park to get it to the garge. Lever is moving ok and bring up D N R P ok but it is still stuck in park.
Any body any ideas what I can check or how I even get it out of park. I've checked all fuses and all seem to be ok.
Thanks David
29th Mar 2015 12:20 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72986
There is a release cable for the park brake under the cover behind the park brake switch. Loop on end of cable, use screwdriver and pull like you think it's going to break.
29th Mar 2015 12:25 pm
Bigdave670
Member Since: 28 Mar 2015
Location: Ballymena
Posts: 8
Thanks for the reply
Yeah I know about the release for the park brake but the park brake is going on and off with the button but all 4 wheels are still locked when the brake goes off. If I pull that lever will it unlock the wheels and does it damage the handbrake in any way?
29th Mar 2015 12:36 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72986
It shouldn't damage anything but don't know if it needs reset. Only used it once and that was years & years ago, can't remember what happened as she was still under warranty and just chucked it back at the dealer.
29th Mar 2015 12:46 pm
Bigdave670
Member Since: 28 Mar 2015
Location: Ballymena
Posts: 8
Yeah I had to pull it a time before and it cost me 1500 quid to get it fixed but I think the handbrake was already wrecked that time. They put it on the rolling road at the mot centre and pulled it on and shattered the handbrake. Just wandering if it will damage it again.
29th Mar 2015 1:18 pm
DSL Keeper of the wheelie bin
Member Since: 11 May 2006
Location: Off again! :-)
Posts: 72986
No idea but wait til someone techie comes along.
29th Mar 2015 1:36 pm
Bigdave670
Member Since: 28 Mar 2015
Location: Ballymena
Posts: 8
Yeah sounds like a good idea.
29th Mar 2015 2:42 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3169
Try doing a hard reset as explained in the wiki it wont do any harm as its been stood for a while and you've put a NEW battery on Discovery 3 se gone
Range rover sport supercharged here:)
29th Mar 2015 2:45 pm
geoffsnook
Member Since: 13 Jun 2014
Location: south wales
Posts: 3169
Bigdave670 wrote:
Yeah I had to pull it a time before and it cost me 1500 quid to get it fixed but I think the handbrake was already wrecked that time. They put it on the rolling road at the mot centre and pulled it on and shattered the handbrake. Just wandering if it will damage it again.
A 4 wheel drive car CANNOT go on a rolling road it must be taken on a test drive for a mot unless they have a 4 wheel brake tester which i've never seen in a mot bay Discovery 3 se gone
Range rover sport supercharged here:)
Pulling the EPB release will require it to be re-latched, either manually or with a diagnostic tool. Current: Discovery 3 06MY (55 reg) HSE Auto Zambezi Silver Allisport Fast Road Intercooler, V8 Brakes, Silicone IC Hoses, EGRs Blanked, Remapped, De-Cat pipe, FBHIC
Freelander 2 2007 HSE Manual Tambora Flame
Previous: FL2 56 reg SE Manual Black (written off )
Disco 3 06 reg B7S Manual Rimini Red
Disco 2 TD5 Y reg ES Manual Blue - Chipped
Several Discovery 300 TDis
29th Mar 2015 2:53 pm
Bigdave670
Member Since: 28 Mar 2015
Location: Ballymena
Posts: 8
How do you do it manually?
Anyone any ideas why it won't start or even turn over?
29th Mar 2015 3:00 pm
Bigdave670
Member Since: 28 Mar 2015
Location: Ballymena
Posts: 8
You'll find a link to the Wiki at the top of the page - it contains various bits of useful information and FAQs etc.Current: Discovery 3 06MY (55 reg) HSE Auto Zambezi Silver Allisport Fast Road Intercooler, V8 Brakes, Silicone IC Hoses, EGRs Blanked, Remapped, De-Cat pipe, FBHIC
Freelander 2 2007 HSE Manual Tambora Flame
Previous: FL2 56 reg SE Manual Black (written off )
Disco 3 06 reg B7S Manual Rimini Red
Disco 2 TD5 Y reg ES Manual Blue - Chipped
Several Discovery 300 TDis
29th Mar 2015 3:10 pm
Bigdave670
Member Since: 28 Mar 2015
Location: Ballymena
Posts: 8
Done the hard reset but didn't do any good. Checked the ecu done the brake light switch and still the same. The gearbox seems to be stuck in park. Gear lever is moving ok and bringing P R N D up on the dash but I don't think it is going into them cos I can take the key out of the ignition when the lever is in any position. Anyone anymore ideas
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum