Member Since: 21 Mar 2014
Location: Co Carlow
Posts: 1958
Can't get either here in Ireland and need to fit the compressor this Sat, will a good brand of Super glue do. I think its only the air intake so its not under pressure or an I wrong?Dale
If you don't need it to stick quickly ie have time for it to set, use araldite or araldite rapide
29th Jan 2015 9:41 pm
Sufil
Member Since: 04 Sep 2014
Location: Berks
Posts: 7
araldite rapid gets my vote
30th Jan 2015 12:23 pm
tanters
Member Since: 24 Oct 2007
Location: Oireland
Posts: 4286
Give Halfrauds in Waterford a call & see if they have AralditeA happy childhood ... is the worst possible preparation for life.
30th Jan 2015 12:46 pm
MikeO
Member Since: 15 Jan 2014
Location: The Cotswolds
Posts: 1384
therealboss wrote:
I think its only the air intake so its not under pressure or an I wrong?
I think it's the exhaust isn't it? So shouldn't see high pressure.2016 Skoda Octavia VRS Estate
<gone>2009 FF Vogue TDV8 Buckingham Blue</gone>
<gone>2015 BMW 520D SE (not my favourite car)</gone>
<gone>2009 D3 HSE Galway Green</gone
30th Jan 2015 1:20 pm
ronp
Member Since: 29 Nov 2006
Location: North Yorkshire
Posts: 15235
You could always make a sleeve to insert between the two parts.
I'd probably look at doing that along with a bonding repair.
It'd give it extra strength .... something that was probably missing
30th Jan 2015 1:28 pm
snailcove
Member Since: 21 Nov 2010
Location: Aberdeenshire
Posts: 460
That q bond looks good stuff to have lying around the house
30th Jan 2015 1:46 pm
DaveJLBI
Member Since: 07 Mar 2014
Location: Clare
Posts: 675
If I was super-gluing it or other bonding methods, I would also put a few zip ties around it to be sure
30th Jan 2015 3:11 pm
therealboss
Member Since: 21 Mar 2014
Location: Co Carlow
Posts: 1958
I used Tiger Bond in the end, 24 hours later I tested the join and I could pick the compressor up by the fitting. I'm sure its going to do the job, time will tell as the compressor was fitted today.Dale
Loctite Black Tack....
This glue stays fund until you spray the hardener....then it sets
was used originally to fid large discrete compost to PCB's (printed Circuit Boards)....I have used this for all sorts or repairs.
The difference is it docent stick until you spray..you can position & hold in the exact place.
Massively strong & "proof"
....http://uk.farnell.com/loctite/4105/adhesive-blacktak-2-part-kit/dp/537172
I always trusted Araldite rapid & normal high strength...which is always in my car, office, homes....Black Tack has solved all sorts of adhesive tasks.BREXIT - done properly.
Right now ...We need Government - not Politics
Save the Dipstick Flagbearer-keep it simple, less likely to fail campaign-agenda items:Starting Handles, Acetylene Lamps.
Founder: Dipsticks-R-Us Inc
D3 HSE-perfectly formed, passenger friendly...has real DIPSTICK
Jag XK-but sadly no DIPSTICK...HUGE design fault
FL2 has DIPSTICK..."real comfort in rear seats"
VW Golf wondermobile (?)..has real DIPSTICK
Morris Minor..original DIPSTICK technology..and a real KEY.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum