I will be machining the enclosures for them on Monday, so expect to have them complete and tested by mid of next week. The boards are made up ready to install with the loom.
It comes with everything you need to install it, loom, connectors, the correct terminal crimp for the webasto plug, etc.
If anyone is interested in one, i wouldn't take any payment until its ready to post.
This is the new USB version, so takes a standard mini USB cable to run the Webasto software for diagnostic / tuning / playing.
• Land Rover 3rd Button key fob operation
• Automatic Fault & Interlock clearing
• Selectable running to set Temperature or Time
• Battery Monitoring and Protection
• Diagnostics port for use with Webasto’s Thermo Test Software
• Priming function
• Buzzer audible confirmations
• Remotely mounted LED (optional)
• Compact and supplied with loom for quick installation.
The remote mounted status LED has been upgraded to display the following: (typically mounted on the A Pillar so you can see it from inside and out the car)
- Heater is running from the control module. (LED Flashes)
- Heater has been started by the car. (LED Steady)
- Heater is running at part load. (4 rapid flashes followed by a 1 second steady)
Price for forum members is £175 for the module.
£12.00 for the water resistant remote LED loom.
£4.49 for P&P.
For each module sold a 5% donation is made to the forum
Developer of the FBH Smart Control Module - Keyfob 3rd button control + USB Diagnostics + remote status LED + priming + battery protection + water temp control setpoint (or fixed run time)
Last edited by discostick on 9th Jan 2024 9:09 am. Edited 13 times in total
10th Jan 2015 1:24 pm
Jay666d
Member Since: 11 Feb 2014
Location: Northumberland
Posts: 753
A big for this guys... Very easy to install, all very neat, easy to use and no extra key fob dragging you down!
All the best, Jay07 Land Rover Discovery III HSE
07 BMW 1200 GS Adventure
08 Mercedes Sprinter
10th Jan 2015 2:03 pm
Apache
Member Since: 16 Oct 2011
Location: Yorkshire
Posts: 692
Put me down for one. I will pay when you have them ready. I will need a receipt - if that's OK?
(PM me when you want money - I don't get on here every day)
10th Jan 2015 3:07 pm
jonand
Member Since: 05 Sep 2014
Location: Lincolnshire
Posts: 42
Looks like a well thought out bit of kit. I would need a separate remote (3rd button assigned to tailgate - which I want to retain) so could you give me an all in price please.
Thanks
Jon2015 HSE in Corris Grey
2005 SE Manual in Zambezi Silver
10th Jan 2015 4:19 pm
discostick
Member Since: 08 Nov 2012
Location: Kent
Posts: 316
Apache wrote:
Put me down for one. I will pay when you have them ready. I will need a receipt - if that's OK?
(PM me when you want money - I don't get on here every day)
No prob, you have a PM.
10th Jan 2015 4:31 pm
discostick
Member Since: 08 Nov 2012
Location: Kent
Posts: 316
jonand wrote:
Looks like a well thought out bit of kit. I would need a separate remote (3rd button assigned to tailgate - which I want to retain) so could you give me an all in price please.
Thanks
Jon
The RF circuit board (RDF1) £15.56 and remote fob (Hornet-TX2) £17.38
I have a board and remote on one of the modules already. So you are welcome to that one.
Or you can purchase them from a number of places: But you will have to pay for the extra postage from them...
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
