TALLPAUL1977
Member Since: 15 Dec 2014
Location: Devon
Posts: 1
  
|
hi im new to this so i hope someone can please help i have a fault with my disco 3 i plugged the computer in and it says that it has a fault with just the exhaust gas recirculation sensor 'A' (P0405) and i can not delete or fix the fault the disco seems to be running fine no lack of power nothing so i dont know what to go for i have looked on forms and other disco's come up with the P0405 fault plus another fault but mine only has the one fault please can someone help me
|
 15th Dec 2014 11:52 pm |
|
|
jonnybgud
Member Since: 18 Dec 2013
Location: Leicestershire
Posts: 397
|
from memory that's the sensor/motor out of range on the end of the egr, it may well be working properly still...
Depending on your budget, you could get the valve replaced or blanked/remapped/egr emulators fitted... or do what I did and just blank them off and connect up a working egr motor to keep the engine light off... Admin on Facebook Discovery 3 & 4 Ownersgroup
Cambelt, Fuel Pump Belt, Oil Pump & Water pump replaced by Flack
Mods:
D4 Conversion (front & rear)
BAS (Bodsy) remap + EGR Delete
FBH Smart Controller
D4 Screen/Navigation
|
| 16th Dec 2014 9:01 am |
|
|
