Member Since: 23 Mar 2014
Location: Warwickshire
Posts: 72
Heated screens
Well 1st ice on the car and neither front or rear screens work, checked fuse in glove box and 2 under bonnet all ok, heater thingy under bonnet don't work neither but that's probably a reset thing I assume. Also tried to access the settings on the dash as per handbook ie press i button 4 less than 2 secs when clear while not moving blardy blah but nothing. Any advice on these issues would be great guy's, thanks.Disco's and bikes
8th Nov 2014 3:19 pm
Mark Y
Member Since: 14 Sep 2008
Location: Warwickshire
Posts: 1249
Can't see why both screens would stop working, anyone else got any ideas ?
You need someone with software and diagnostic to reset FBH
10th Nov 2014 12:41 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
Any current being drawn through the fuse?Land Rover - Turning Drivers into Mechanics Since 1948
Member Since: 23 Mar 2014
Location: Warwickshire
Posts: 72
I'll give it a go but wouldn't the fuse need to be broken to get a measurement? Otherwise there would be no read as you're in series?Disco's and bikes
10th Nov 2014 9:53 am
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
It would not work if fuse was blown as you are measuring a tiny potential difference across a resistor (as that is what a fuse is) of a known value. From the millivolts shown you can deduced the current flow. If you used a standard amp meter the power in the circuit would probably blow its internal fuse.
Member Since: 23 Mar 2014
Location: Warwickshire
Posts: 72
Only got a few minutes on the disco yesterday , both 30a fused dead, put ignition on but neither front or rear switches would work so had to start the engine. with engine running both switches lit and both fuses show 12v. I assume the fuses are between the element and the relays and if so this would indicate the relays are functioning ? Tried to get access to the elements to check for volts but cannot get at them.
I also assume there is a body control unit that controls the heated screens ?Disco's and bikes
11th Nov 2014 12:41 pm
Big Den
Member Since: 23 Mar 2014
Location: Warwickshire
Posts: 72
Still no screens, a mate has an old diagnostic unit and it says rear screen is on (well its not heating up ) and he couldn't find the front screen on the device.
I am hoping its a coincidence that both are kaput, could do with getting these running as with these and the FBH not working it a bit of a pain Disco's and bikes
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum