Member Since: 27 Mar 2008
Location: Riyadh, KSA
Posts: 3077
Hi I'll go out and take some better photos for you this morning. The bracket just reused something I had in the bits box in the garage I think it came off an old roof rack or something on my TD5 disco. It was just bent to fit and then covered in black tape (I meant to plastidip it but never did as you can't see it)
The ham install is coming out of the D4 after this weekend, if you're interested then I can just stick the bracket in a jiffy bag and post it to you?D4 XS, gone, much loved, never forgotten
2018 FFRR SDV8 Autobiography - Gone to someone with less sense and more time to enjoy it
2016 Toyota Hilux Invincible - Liberating experience
21st Apr 2021 7:36 am
steam
Member Since: 02 Jun 2017
Location: Luxembourg
Posts: 9
thank you James, I'll try to make the bracket by myself and see if it works.
21st Apr 2021 10:36 am
steam
Member Since: 02 Jun 2017
Location: Luxembourg
Posts: 9
post some pics as follow-ups.
I designed and 3d printed the bracket (used ASA filament, won't melt in summer), the mount works pretty well.
25th Aug 2022 8:45 pm
Moleshome
Member Since: 15 Oct 2020
Location: Wokingham
Posts: 412
Very nice, I just bent a bit of sheet aluminium to suit.
Rather than routing the cable round the air vent and down the side those side pieces pop off quite easily and you can run the wire behind them to hide it completely.
25th Aug 2022 10:06 pm
James W
Member Since: 27 Mar 2008
Location: Riyadh, KSA
Posts: 3077
Top job that, very nicely done D4 XS, gone, much loved, never forgotten
2018 FFRR SDV8 Autobiography - Gone to someone with less sense and more time to enjoy it
2016 Toyota Hilux Invincible - Liberating experience
26th Aug 2022 8:17 pm
steam
Member Since: 02 Jun 2017
Location: Luxembourg
Posts: 9
Moleshome wrote:
Very nice, I just bent a bit of sheet aluminium to suit.
Rather than routing the cable round the air vent and down the side those side pieces pop off quite easily and you can run the wire behind them to hide it completely.
Good idea! Will try it.
27th Aug 2022 6:33 am
steam
Member Since: 02 Jun 2017
Location: Luxembourg
Posts: 9
James W wrote:
Top job that, very nicely done
Thank you for the inspiration James
27th Aug 2022 6:35 am
DCLR4
Member Since: 18 Oct 2022
Location: San Francisco
Posts: 3
Hello Steam,
I'm doing a HAM radio install on my LR4; I really like the 3d printed bracket you created. Would you be willing to sell & ship one to me? or share your 3D printer file (I don't have a 3D printer, but I might be able to find one). Thanks!
18th Oct 2022 8:15 am
steam
Member Since: 02 Jun 2017
Location: Luxembourg
Posts: 9
No problem at all, but I don't know how to attach a file with my post here, would you pm your email so that I can send the stl file to you?
Please be aware the mount holes on it was designed for Icom ID-5100, if you want to mount with other rigs you may need the holes to be relocated.
18th Oct 2022 11:20 am
DCLR4
Member Since: 18 Oct 2022
Location: San Francisco
Posts: 3
Thanks! I'll PM you (it saying I need to do 3 posts before I can PM - so I'll do one more post )
18th Oct 2022 3:15 pm
DCLR4
Member Since: 18 Oct 2022
Location: San Francisco
Posts: 3
Okay - my 3rd post, hopefully I can pm now!
18th Oct 2022 3:16 pm
Moleshome
Member Since: 15 Oct 2020
Location: Wokingham
Posts: 412
steam wrote:
No problem at all, but I don't know how to attach a file with my post here, would you pm your email so that I can send the stl file to you?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum