Member Since: 27 Dec 2005
Location: Zurich
Posts: 453
Help - Which Push In Air Line Nylon Hose Connectors - Comp?
HELP ! So I replaced the dryer on my air compressor today, its pretty simple apart from the black intake and release air lines, one of which I had to cut and on the other one the connector broke.
This has happened to so many people now (despite liberal amounts of WD40 days in advance) I would recommend also buying these connectors before you start. I understand these are available on ebay for peanuts but could somebody please guide me to the right ones to buy for the 8 & 10 MM hoses please ? I understand its probably something like this ??????
Member Since: 27 Dec 2005
Location: Zurich
Posts: 453
Guys whilst the car is safe to drive, I need to get this sorted please ??????
15th May 2014 7:52 pm
Allan_T
Member Since: 10 Sep 2012
Location: Northampton
Posts: 1034
I purchased mine from here -
http://www.bearingboys.co.uk/Joiner-1189-cGAP IID Pro Multi Vehicle Defender L316 2007-2015 - Discovery 3 - Discovery 4 - Discovery Sport L550 - Freelander 2 - Range Rover Evoque L538 - Range Rover L322 - Range Rover L405 - Range Rover Sport L320 - Range Rover Sport L494 Electrical Fault Diagnostics
15th May 2014 8:01 pm
richardch
Member Since: 27 Dec 2005
Location: Zurich
Posts: 453
Allan that's very helpful mate, I simply need a 8mm > 8mm and a 10mm > 10mm ??
15th May 2014 8:43 pm
Woolmeister
Member Since: 26 Mar 2007
Location: Chandler's Ford
Posts: 3459
Timely - I'm about to do mine tomorrow but have no connectors to hand in case of breakage!
Yes, I understand you need one 8mm and another 10mm.
Do you know what size bolts I need to replace the corroded ones that attach the compressor bracket to the chassis and the compressor cover to the chassis?
I have new captive nuts but, looking at the bolts, they have seen better days.
Steve2021 BMW iX3 Premier Edition in Carbon Black ⚡️🔌
2019 Škoda Kodiaq 2.0 Tdi 190 DSG Sportline in Quartz Grey. Excellent vehicle. Gone.
2017 Discovery Sport HSE Auto in Carpathian Grey and Ebony Leather. Modern JLR Junk. Gone.
2007 Discovery 3 TDV6 S Manual in Zermatt Silver with Ebony Cloth (143k) Gone, but now patrolling the Asia section of the West Midlands Safari Park!
15th May 2014 8:55 pm
Allan_T
Member Since: 10 Sep 2012
Location: Northampton
Posts: 1034
richardch wrote:
Allan that's very helpful mate, I simply need a 8mm > 8mm and a 10mm > 10mm ??
That's correct GAP IID Pro Multi Vehicle Defender L316 2007-2015 - Discovery 3 - Discovery 4 - Discovery Sport L550 - Freelander 2 - Range Rover Evoque L538 - Range Rover L322 - Range Rover L405 - Range Rover Sport L320 - Range Rover Sport L494 Electrical Fault Diagnostics
15th May 2014 9:08 pm
richardch
Member Since: 27 Dec 2005
Location: Zurich
Posts: 453
How do heat the pipes to get them to fit the adaptor with a hair dryer ?
16th May 2014 6:33 am
Advanced Factors Site Sponsor
Member Since: 27 Nov 2012
Location: Southampton
Posts: 2648
Woolmeister wrote:
Do you know what size bolts I need to replace the corroded ones that attach the compressor bracket to the chassis and the compressor cover to the chassis?
Steve
Compressor to chassis are M8 X 25mm FS108256 (was FS108257L)Paul Redding
+44 (0)23 8052 2774
Order Parts Online at www.advancedfactors.co.uk
16th May 2014 8:20 am
richardch
Member Since: 27 Dec 2005
Location: Zurich
Posts: 453
richardch wrote:
How do heat the pipes to get them to fit the adaptor with a hair dryer ?
Its pretty impossible to get the hose over a 10 mm & 8 mm straight connectors as the rubber is very solid even if you heat it, so I have ordered reducers ie 10 to 8 mm and 8 mm to 6 mm
Unless I am missing something ??
16th May 2014 9:29 am
richardch
Member Since: 27 Dec 2005
Location: Zurich
Posts: 453
So isnt a straight reducing connector like this more appropriate ? How does the other side of the push in connector,
connect with the compressor socket ?
16th May 2014 12:54 pm
Allan_T
Member Since: 10 Sep 2012
Location: Northampton
Posts: 1034
Post a picture of the damaged connector to save any confusion, the inline push fit connectors are used to join pipework that has been cut or extended.GAP IID Pro Multi Vehicle Defender L316 2007-2015 - Discovery 3 - Discovery 4 - Discovery Sport L550 - Freelander 2 - Range Rover Evoque L538 - Range Rover L322 - Range Rover L405 - Range Rover Sport L320 - Range Rover Sport L494 Electrical Fault Diagnostics
16th May 2014 2:05 pm
richardch
Member Since: 27 Dec 2005
Location: Zurich
Posts: 453
I cut the 10mm line right at the very end before the connector so its just a tad shorter and the 8mm line is normal length but both pipe connectors broke when I removed them.
Hence why I am thinking that I simply push a connector like the blue one directly into the compressor (instead of the pipe) and connect the pipe to the other end
16th May 2014 2:21 pm
nighthawk
Member Since: 24 Jul 2010
Location: Malta
Posts: 1163
You will not manage to use the barb type connector (like the blue one) with the air pipe used in for the air suspension. Don't even try to. At more than 200psi of pressure you're risking something.
The air hoses used in the D3 EAS system are designed for push-in fittings ONLY. The hose is pushed INTO the fitting, not over it.
The barb type connectors (such as the blue one) require hoses to be pushed OVER them, and then secured with hose clips (jubilee clips). But they are totally different hoses. You will definitely not manage to stuff a barb connector into the compressor.
It is still not clear to me what your situation is, maybe take a few photos with your phone and show everyone, in the hope of better understanding your situation and being able to offer some more help.Dennis
2006 Discovery 3 TDV6 Commercial Manual Buckingham Blue
16th May 2014 2:29 pm
richardch
Member Since: 27 Dec 2005
Location: Zurich
Posts: 453
Ok looks like this now, I thought the open push in connectors were crap, so would prefer not to use these if possible
16th May 2014 2:48 pm
Allan_T
Member Since: 10 Sep 2012
Location: Northampton
Posts: 1034
richardch wrote:
I cut the 10mm line right at the very end before the connector so its just a tad shorter and the 8mm line is normal length but both pipe connectors broke when I removed them.
Hence why I am thinking that I simply push a connector like the blue one directly into the compressor (instead of the pipe) and connect the pipe to the other end
So the collet broke on both connectors?
Post some pictures of the damaged parts.GAP IID Pro Multi Vehicle Defender L316 2007-2015 - Discovery 3 - Discovery 4 - Discovery Sport L550 - Freelander 2 - Range Rover Evoque L538 - Range Rover L322 - Range Rover L405 - Range Rover Sport L320 - Range Rover Sport L494 Electrical Fault Diagnostics
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum