DISCO3.CO.UK - View topic - M10 seat rail screws

Advertise on DISCO3.CO.UK

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Members Map · Groups · Profile · Donate · Log In

DISCO3.CO.UK > Maintenance & Mods (D3)

M10 seat rail screws - are they special?

Page 1 of 1

LHD

Member Since: 05 Apr 2006
Location: Lugano area
Posts: 689

2006 Discovery 3 TDV6 HSE Auto Tonga Green

M10 seat rail screws - are they special?

I'm wanting to put in a Ram-Mount RAM-B-316-1-202U onto my passenger seat base. I've removed the screw which appears to be an M10 torx T50-headed screw that's 30mm long.

It's too short to screw in the mount base so I'm looking for a replacement.

The screw is interesting as it's not threaded all the way to the end - and I have tried a longer M10 (60mm, far too long) and there is definitely a narrowing in the hole.

I would assume I can use a 40/45mm M10? Thanks for any tips!

It's a longer BTR2710 that I'm looking for..... Discovery 3 Manual as PDF | Blackvue 500 | BAS Remap | Mates did South America in a Landie

28th Nov 2013 9:03 pm

Martin
Site Admin and Owner

Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18563

2006 Discovery 3 TDV6 SE Manual Buckingham Blue

Possibly HYG500250 if the washer doesn't get in the way? 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!

28th Nov 2013 9:35 pm

Martin
Site Admin and Owner

Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18563

Which is from the second row seats, you can take one out to try it

06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!

28th Nov 2013 9:41 pm

LHD

Member Since: 05 Apr 2006
Location: Lugano area
Posts: 689

Martin, looks good if it's the right diameter....!! Looks to be about 40mm and the washer can only be good.....! Discovery 3 Manual as PDF | Blackvue 500 | BAS Remap | Mates did South America in a Landie

28th Nov 2013 9:48 pm

DSL
Keeper of the wheelie bin

Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73084

If you take one from the middle don't forget to replace it with something, the hole is through to the outside. I've replaced my original bolts with high tensile hex bolts as I take my seats out every spring, the original torx heads just strip.

28th Nov 2013 9:54 pm

LHD

Member Since: 05 Apr 2006
Location: Lugano area
Posts: 689

Martin wrote:
Which is from the second row seats, you can take one out to try it

Mental!!!

But I'm not doing it now..........tomorrow!!

Discovery 3 Manual as PDF | Blackvue 500 | BAS Remap | Mates did South America in a Landie

28th Nov 2013 9:55 pm

Martin
Site Admin and Owner

Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18563

I wasn't suggesting leaving a seat bolt missing

Just borrowing it for a quick trial fit in the front before ordering another

06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!

28th Nov 2013 9:58 pm

LHD

Member Since: 05 Apr 2006
Location: Lugano area
Posts: 689

maybe I can do a swap. If it's dangerous, I'll do it for the seat the mother-in-law uses

DSL - any links to your bolts? Discovery 3 Manual as PDF | Blackvue 500 | BAS Remap | Mates did South America in a Landie

28th Nov 2013 10:01 pm

Martin
Site Admin and Owner

Member Since: 06 Nov 2004
Location: Hook Norton
Posts: 18563

They are a standard M10x1.5 thread apparently, so high-tensile (10.9) 'normal' bolts would be fine too. 06 D3 SE / 15 LR D90 XS SW / 88 LR 90 Td5 / 68 BMW 2000 ti
Any issues with the site let me know!

28th Nov 2013 10:03 pm

DSL
Keeper of the wheelie bin

Member Since: 11 May 2006
Location: Off again! :-)
Posts: 73084

Sorry no link, got them from a fastening place in Inverness. M10 40mm long I think, though M number may be wrong. I also use copperslip on them as they can be a but difficult to get out.

28th Nov 2013 10:04 pm

LHD

Member Since: 05 Apr 2006
Location: Lugano area
Posts: 689

so I'm currently there with a swap from 2nd row to front an vice versa. The Ram-Mount is in place and the hole is plugged......

I think as this is a one-off that I'll get a pukker replacement......

Cheers for the hints, just a little out-of-the-box thinking is what it took.... Discovery 3 Manual as PDF | Blackvue 500 | BAS Remap | Mates did South America in a Landie

30th Nov 2013 9:46 am

Page 1 of 1

Jump to:

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Quote Reply

DISCO3.CO.UK is independent and not affiliated to Land Rover.