Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Ok so I’ve got the plug off and see the green and black wire (attached)
So I’d cut the wire and modify to wire plug end to A and wire end to B… But in your diagram, where does the end of Bs wire go as your drawing it stops and goes nowhere?
Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
28th Mar 2023 4:09 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10663
Goes to the other cut wire end, that goes into the loom
28th Mar 2023 4:11 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Sorry I’m not understanding
Please see my drawing. With question mark where I’m lost..
Do you mean run the wire to number 3 on your drawing? Next to the red wire?
Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
28th Mar 2023 4:28 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10663
So what you are trying to do is cut the green black wire and insert the controller in between.
You cut a wire and end up with 2 ends.
The ends go into A and E.
28th Mar 2023 4:31 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Apologies sorry! It just carries off in the loom to wherever it goes!Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
28th Mar 2023 4:33 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10663
I think you understand now.
It’s going to be the same principal with the relay behind climate panel.
28th Mar 2023 4:37 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Ok I think I’ve got it now!
Does this look about right please?
The only thing I’m struggling with now is locating the correct green white wire on the CC
I can not understand how to locate the PIN numbers
Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
28th Mar 2023 5:07 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Sorry just seen now use eye glass to see number one on bigger loom on CCDisco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
28th Mar 2023 5:14 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
Can’t be the yellow plug as it hasn’t got 7 pins regardless of then mostly being green white
Can’t be the double wire plug as neither are green white
Could th the right plug but pin 7 appears to be more yellow than white / green
Main plug 7th in is green white. It’s the only one I can count that seems to match up. If I count in from other side or the under side wires none match up
Shall I cut the one separated in image you reckon is the one?
Top image is one I think most likely.
Disco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
28th Mar 2023 5:31 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10663
This looks ok
Click image to enlarge
28th Mar 2023 5:54 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10663
yeah this one. Cut the one with screwdriver.
Click image to enlarge
Pin 1 on the right for my reference
28th Mar 2023 6:03 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10663
Oh hand on a sec.......
28th Mar 2023 6:07 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10663
yeah seams to be that one.
28th Mar 2023 6:14 pm
cmb2020
Member Since: 08 Sep 2020
Location: Buckley, North Wales
Posts: 1150
I’ve set up most of the wiring…
Does the ignition 12 (15) on ipcu just go to a car fuse tht is ignition live?
Does the voltage setting input on ipcu just get bridged to 85 then 86 if 85 didn’t work?
ThbaksDisco 3 SE Manual 2005 V6 2.7
Buckley, North Wales
28th Mar 2023 7:27 pm
Pete K
Member Since: 15 Jan 2016
Location: GL
Posts: 10663
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
