Member Since: 09 Oct 2006
Location: Johannesburg
Posts: 106
Tpms
This is what I see on my iidtool. Not sure what to activate under tpms
19th May 2015 1:11 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
TPMS Spare Wheel Yes
Tyre Pressure Mode System Monitoring system TPMS With WBL, DLS, WT, No HSPA
Tyre Pressure Monitor / Warning System Tire pressure monitor system is fitted.
Tyre Pressure Monitor Switchable Pressures Push Button Switchable pressures enabled.
Tyre Pressure Monitor System Transmitter Frequency 433.92MHz
Land Rover - Turning Drivers into Mechanics Since 1948
Sorry to resurrect this thread.
My car had the normal 2011 20 inch wheels and the TPM worked no problem, however I have just fitted a set of 20 inch Red edition wheels and the TPM does not seem to recognise the valves.
According to my iidtool my settings are WBL-DLS-WT
In the short term I have disabled the system, however I would like to get it up and running if possible. Does anyone know what the WBL-DLS-WT vs TPMS-WBL means? Or what the correct setting should be?
Click image to enlarge
Red Edition Wheels - TPMS not recognised by car.
Click image to enlarge
Original Std Wheels - TPM worked fine.
Click image to enlarge
Thanks
SydIn Spain - 2018 F Pace - Down and out's Velar
In UK - Dare not say on this Forum
Gone - Lots of Lode Lane vehicles.
- Beta User
The TPMS system was revised with a new type of sensor being used. I can't remember exactly when the sensor type changed but that may be the reason ie your new wheels using the newer type sensor which is incompatible with the original TPMSLRs are a fond memory, apart from the maintenance.
Mr H
Thanks for the reply, you could be right, I do not know when the Valves changed. My Car is a 2011, and I bought the Wheels in 2013, so I was hoping the wheels/valves would have been the same.
What I really need is someone to read their TPMS and post the settings.
Brucehun's settings are TPMS-WBL, whereas mine was WBL-DLS-WT (this setting worked on my original wheels)
My iidtool lists several settings, I guess I can go through every one, but this is a pain, update the ccf, drive the car for 15 mins etc
Mine is a 2010MY so should be same system as yours. Not got to IID with me at mo and am at the Outlaws for lunch, but I'll connect up when home and post the settings for you late afternoon/evening. I promised Pat from GAPDiag to send him some feedback on another matter so can kill two birds with one stone LRs are a fond memory, apart from the maintenance.
Thanks for posting that, it's the same as mine. Guess I will have to just have a play and go through all the different options, maybe I will do one a day In Spain - 2018 F Pace - Down and out's Velar
In UK - Dare not say on this Forum
Gone - Lots of Lode Lane vehicles.
- Beta User
I don't believe changing the settings will help you. The revision was a hardware change of both the wheel sensor and the receivers in the wheel arch - so unless you replace either the sensors with the older version or the Receivers with the newer I don't believe you'll have any look in getting it to work.
That said, I may have an option for you in a couple of months time. I have a set of wheels with old type sensors on and want to keep the wheels for SWMBO's MY16 D4 so will need a set of new type sensors - I'd be happy to do a swap if we can confirm the ones in your wheels are definitely the later/current version.
The downside is that at present the wheels are still on my MY10 to run down the Michelin tyres before replacing them with Duratracs at the same time as swapping sensors. I have still got a few months of motoring left in the tyres, so probably won't be looking to do this until the end November or beginning of December this year at the earliest, but let me know if you are interested. LRs are a fond memory, apart from the maintenance.
I think I will have to get one of tyre beads broken and read the valve info, it could be my valves are NAS spec
433 MHz or 315 MHz ???
Syd
http://www.rrsport.co.uk/gallery/albums/userpics/13394/TPMS~0.pdfIn Spain - 2018 F Pace - Down and out's Velar
In UK - Dare not say on this Forum
Gone - Lots of Lode Lane vehicles.
- Beta User
Removed spare wheel but never appeared again when replaced also after having new tyres fitted not getting any pressure values on the display all four corners showing as zero and no spare showing ?
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum