Advertise on DISCO3.CO.UK
Forum · Gallery · Wiki · Shop · Sponsors
DISCO3.CO.UK > Technical (D4)

TPMS question -
Post Reply  Down to end
Page 2 of 4 <1234>
Brucehun
 


Member Since: 09 Oct 2006
Location: Johannesburg
Posts: 106

South Africa 2010 Discovery 4 5.0 V8 HSE Auto Ipanema SandDiscovery 4
tpms

Thanks Robbie, using iidtool bluetooth and need to turn tpms on.
  
Post #147532518th May 2015 8:53 am
View user's profile Send private message View poster's gallery Reply with quote
Robbie
 


Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932

United Kingdom 2013 Discovery 4 3.0 SDV6 HSE Auto Baltic BlueDiscovery 4

Depending on what you disabled and if you have TPMS on the spare or not you will be adjusting the following to enabled or fitted:

Quote:
TPMS Spare Wheel
No
83%

Tyre Pressure Mode System
Without monitoring system
68%

Tyre Pressure Monitor / Warning System
Tire pressure monitor system is not fitted.
68%

Tyre Pressure Monitor Switchable Pressures Push Button
Switchable pressures disabled.
68%
 Land Rover - Turning Drivers into Mechanics Since 1948

Battery & Quiescent Current Drain Testing

Diagnostics for:
Defender, FL2, D3, D4, Evoque, RRS & FFRR
A not-for-profit enterprise


 
 
Post #147539218th May 2015 12:01 pm
View user's profile Send private message View poster's gallery Reply with quote
Brucehun
 


Member Since: 09 Oct 2006
Location: Johannesburg
Posts: 106

South Africa 2010 Discovery 4 5.0 V8 HSE Auto Ipanema SandDiscovery 4
Tpms

This is what I see on my iidtool. Not sure what to activate under tpms


  
Post #147591719th May 2015 12:11 pm
View user's profile Send private message View poster's gallery Reply with quote
Robbie
 


Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932

United Kingdom 2013 Discovery 4 3.0 SDV6 HSE Auto Baltic BlueDiscovery 4

TPMS Spare Wheel Yes
Tyre Pressure Mode System Monitoring system TPMS With WBL, DLS, WT, No HSPA
Tyre Pressure Monitor / Warning System Tire pressure monitor system is fitted.
Tyre Pressure Monitor Switchable Pressures Push Button Switchable pressures enabled.
Tyre Pressure Monitor System Transmitter Frequency 433.92MHz

Thumbs Up
 Land Rover - Turning Drivers into Mechanics Since 1948

Battery & Quiescent Current Drain Testing

Diagnostics for:
Defender, FL2, D3, D4, Evoque, RRS & FFRR
A not-for-profit enterprise


 
 
Post #147593819th May 2015 1:17 pm
View user's profile Send private message View poster's gallery Reply with quote
Brucehun
 


Member Since: 09 Oct 2006
Location: Johannesburg
Posts: 106

South Africa 2010 Discovery 4 5.0 V8 HSE Auto Ipanema SandDiscovery 4

Working again, Thanks Robbie.
  
Post #147594219th May 2015 1:51 pm
View user's profile Send private message View poster's gallery Reply with quote
Brucehun
 


Member Since: 09 Oct 2006
Location: Johannesburg
Posts: 106

South Africa 2010 Discovery 4 5.0 V8 HSE Auto Ipanema SandDiscovery 4

Only worked for 100m then showed error. I then went through settings ccf and set 'undefined' and it now works correctly.
  
Post #14855369th Jun 2015 8:01 pm
View user's profile Send private message View poster's gallery Reply with quote
Syd
 


Member Since: 02 Nov 2008
Location: Spain & Hampshire UK
Posts: 860

United Kingdom 

Sorry to resurrect this thread.
My car had the normal 2011 20 inch wheels and the TPM worked no problem, however I have just fitted a set of 20 inch Red edition wheels and the TPM does not seem to recognise the valves.
According to my iidtool my settings are WBL-DLS-WT
In the short term I have disabled the system, however I would like to get it up and running if possible. Does anyone know what the WBL-DLS-WT vs TPMS-WBL means? Or what the correct setting should be?

Click image to enlarge

Red Edition Wheels - TPMS not recognised by car.
Click image to enlarge

Original Std Wheels - TPM worked fine.
Click image to enlarge


Thanks
Syd
 In Spain - 2018 F Pace - Down and out's Velar
In UK - Dare not say on this Forum
Gone - Lots of Lode Lane vehicles.
- Beta User 
 
Post #153537426th Sep 2015 1:33 pm
View user's profile Send private message View poster's gallery Reply with quote
MrH
 


Member Since: 08 Aug 2007
Location: lost in the forest
Posts: 7754

United Kingdom 

The TPMS system was revised with a new type of sensor being used. I can't remember exactly when the sensor type changed but that may be the reason ie your new wheels using the newer type sensor which is incompatible with the original TPMS
 LRs are a fond memory, apart from the maintenance.  
Post #153544726th Sep 2015 4:57 pm
View user's profile Send private message View poster's gallery Reply with quote
Syd
 


Member Since: 02 Nov 2008
Location: Spain & Hampshire UK
Posts: 860

United Kingdom 

Mr H
Thanks for the reply, you could be right, I do not know when the Valves changed. My Car is a 2011, and I bought the Wheels in 2013, so I was hoping the wheels/valves would have been the same.

What I really need is someone to read their TPMS and post the settings. Bow down Thumbs Up
Brucehun's settings are TPMS-WBL, whereas mine was WBL-DLS-WT (this setting worked on my original wheels)

My iidtool lists several settings, I guess I can go through every one, but this is a pain, update the ccf, drive the car for 15 mins etc Big Cry

Wheels were bought in 2013
http://www.rrsport.co.uk/forum/topic31079....ion+wheels
 In Spain - 2018 F Pace - Down and out's Velar
In UK - Dare not say on this Forum
Gone - Lots of Lode Lane vehicles.
- Beta User 
 
Post #153581327th Sep 2015 11:39 am
View user's profile Send private message View poster's gallery Reply with quote
MrH
 


Member Since: 08 Aug 2007
Location: lost in the forest
Posts: 7754

United Kingdom 

Mine is a 2010MY so should be same system as yours. Not got to IID with me at mo and am at the Outlaws for lunch, but I'll connect up when home and post the settings for you late afternoon/evening. I promised Pat from GAPDiag to send him some feedback on another matter so can kill two birds with one stone Wink
 LRs are a fond memory, apart from the maintenance.  
Post #153581927th Sep 2015 11:56 am
View user's profile Send private message View poster's gallery Reply with quote
MrH
 


Member Since: 08 Aug 2007
Location: lost in the forest
Posts: 7754

United Kingdom 

One set of settings from my 2010MY with TPMS as promised
Click image to enlarge
 LRs are a fond memory, apart from the maintenance.  
Post #153590427th Sep 2015 3:22 pm
View user's profile Send private message View poster's gallery Reply with quote
Syd
 


Member Since: 02 Nov 2008
Location: Spain & Hampshire UK
Posts: 860

United Kingdom 

Thanks for posting that, it's the same as mine. Guess I will have to just have a play and go through all the different options, maybe I will do one a day Whistle
 In Spain - 2018 F Pace - Down and out's Velar
In UK - Dare not say on this Forum
Gone - Lots of Lode Lane vehicles.
- Beta User 
 
Post #153622528th Sep 2015 8:28 am
View user's profile Send private message View poster's gallery Reply with quote
MrH
 


Member Since: 08 Aug 2007
Location: lost in the forest
Posts: 7754

United Kingdom 

I don't believe changing the settings will help you. The revision was a hardware change of both the wheel sensor and the receivers in the wheel arch - so unless you replace either the sensors with the older version or the Receivers with the newer I don't believe you'll have any look in getting it to work.

That said, I may have an option for you in a couple of months time. I have a set of wheels with old type sensors on and want to keep the wheels for SWMBO's MY16 D4 so will need a set of new type sensors - I'd be happy to do a swap if we can confirm the ones in your wheels are definitely the later/current version.

The downside is that at present the wheels are still on my MY10 to run down the Michelin tyres before replacing them with Duratracs at the same time as swapping sensors. I have still got a few months of motoring left in the tyres, so probably won't be looking to do this until the end November or beginning of December this year at the earliest, but let me know if you are interested. Thumbs Up
 LRs are a fond memory, apart from the maintenance.  
Post #153627228th Sep 2015 10:47 am
View user's profile Send private message View poster's gallery Reply with quote
Syd
 


Member Since: 02 Nov 2008
Location: Spain & Hampshire UK
Posts: 860

United Kingdom 

I think I will have to get one of tyre beads broken and read the valve info, it could be my valves are NAS spec Big Cry
433 MHz or 315 MHz ???
Syd
http://www.rrsport.co.uk/gallery/albums/userpics/13394/TPMS~0.pdf
 In Spain - 2018 F Pace - Down and out's Velar
In UK - Dare not say on this Forum
Gone - Lots of Lode Lane vehicles.
- Beta User 
 
Post #153629828th Sep 2015 12:11 pm
View user's profile Send private message View poster's gallery Reply with quote
SGH
 


Member Since: 21 Dec 2009
Location: Hellingly. East Sussex.
Posts: 1178

United Kingdom 2015 Discovery 4 3.0 SDV6 HSE Lux Auto Montalcino RedDiscovery 4

I'm having issue on mine....

Removed spare wheel but never appeared again when replaced also after having new tyres fitted not getting any pressure values on the display all four corners showing as zero and no spare showing ?

This is screen shot from IIDTool


 Defender 300Tdi 110 HCP - Keswick Green
Discovery 4 SDV6 HSE LUX - Montalcino Red/Black Pack - Gone
Connect L2 Double Cab - Moondust Silver
Connect L1 - Moondust Silver
VW California Ocean 150PS DSG - Reflex Silver 
 
Post #15856261st Jan 2016 10:46 am
View user's profile Send private message View poster's gallery Send e-mail Reply with quote
Display posts from the last:  
Post Reply Back to top
Page 2 of 4 <1234>
Jump to:  
Previous Topic | Next Topic >


Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



DISCO3.CO.UK Copyright © 2004-2024 Futuranet Ltd & Martin Lewis
DISCO3.CO.UK RSS Feed - All Forums

DISCO3.CO.UK is independent and not affiliated to Land Rover.
Switch to Mobile Site