Member Since: 16 Apr 2010
Location: Glasgow
Posts: 430
Parking Sensors with trailer
When I have a trailer attached all the sensors are disabled ( front and back )
Is this correct for a MY2012 car
On my D3 it was only the rear that was disabled or is there another setting in the ccf /eucd I have missed
Thanks,
Ian.
14th Jun 2013 7:09 pm
Robbie
Member Since: 05 Feb 2006
Location: ¯\_(ツ)_/¯
Posts: 17932
The original D3 settings were great as the fronts came on automatically at very low speed; this was revised for later cars.
On the D4 they only come on if you use reverse first or select them on. If the rears are disabled by the trailer then only the manual selection for the fronts is available.
I'm going to nudge something with the front one day.
Is it possible to set the fronts to low-speed automatic with an MSV or IID?Land Rover - Turning Drivers into Mechanics Since 1948
I haven't tested the front sensors whilst towing so can't confirm yet it they work or not, but it seems that on the 2013 RRS, the front sensors are disabled when towing, can anyone confirm if this is also the case with the MY13 D4
10th Oct 2013 7:53 pm
motolite
Member Since: 18 Mar 2013
Location: Sydney
Posts: 931
The front sensors don't work on my MY13 with a trailer or bike rack fitted. The explanation I was given by the dealer-there is only 1 module for F and R. My ex-volvo XC60 on the other hand would work the F if I had the rack on. Go figure?
Mmmm, as I thought, I have had an email from LRCS saying they should work, but then again someone I know with a RRS has also had the same reply, but now LR have changed their mind and apparently they are no longer supposed to work with a trailer attached.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
